![Kenwood KVT-719DVD Service Manual Download Page 36](http://html.mh-extra.com/html/kenwood/kvt-719dvd/kvt-719dvd_service-manual_187235036.webp)
36
KVT-719DVD/729DVD
/729DVDY/739DVD
2-3-8. HPOSI screen
Adjust each screen’s horizontal display position.
The screen shall be transferred like “Graphic
→
NAVI
→
”.
(In case of “KOS” series, screen shall be changed as follows:
“Graphic
→
VIDEO (NT)
→
NAVI
→
VIDEO (PAL)”)
HSY adjustment is applicable to “KVT/DDX Graphic” and
“DNX Graphic/NAVI”. Adjustment screen is shown in Figure
2-3-7.
↓
Figure 2-3-7 HPOSI screen
[Key specifi cation]
Next: Move on to the next HPOSI screen. When the
screen is the NAVI screen, start writing in the E2PROM.
<<: Screen moves toward the left.
>>: Screen moves toward the right.
Cancel: Move on to Test Mode Main screen.
Return: Move on to Test Mode Main screen.
If “HPOSI NG (E2PROM Write NG)” is shown, go to the
test mode again to start over the adjustment.
DVD wallpaper should be fi xed to NTSC. When adjusting
DVD, TDV-540A (Title3-Chapter16) shall be played. After
loading the DISC, use Ten-key 4 to transfer to “Title3-
Chapter16”. (KVT/DDX/DNX)
Note:
If “NG” is shown, go to the test mode again to start
over the adjustment.
2-3-9. Auto Adjust screen
This section displays the keys that are related to auto
adjustment.
The contents displayed on the Auto Adjust screen are shown
in Figure 2-3-8.
Note:
Data related with Chroma auto adjustment can be
cleared by the [Clear] key on the Service screen.
Refer to hardware service documents for equipment to
connect to the set.
Figure 2-3-8 Auto Adjust screen
[Key specifi cation]
GAMMA
Curve
: Move on to GAMMA Curve screen.
Tint/Phase: Move on to Tint/Phase screen.
RGB: Move on to RGB screen.
CHROMA FNC: Move on to CHROMA FNC screen.
Free Run Frequency: Move on to Free Run Frequency
screen.
CHROMA Auto: Collectively adjust the following: “Free
Run Frequency
→
Tint/Phase
→
GAMMA”.
Return: Move on to Test Mode Main screen.
2-3-9-1. GAMMA Curve screen
Auto adjust the
γ
curve of the Chroma
γ
IC and save it in
E2PROM.
The screen after the completion of GAMMA Curve auto
adjustment is shown in Figure 2-3-9.
Figure 2-3-9 GAMMA Curve screen
Step value
Step value
Next
Graphic
HSY
Cancel
<<
<<
>>
>>
HPOSI OK/NG
Return
Return
Auto Adjust
GAMMA Curve
Tint/Phase
RGB
CHROMA FNC
Free Run Frequency
CHROMA Auto
Auto Adjust OK/NG
Return
TEST MODE