32
KVT-719DVD/729DVD
/729DVDY/739DVD
1. Generals
1-1. Purpose
This document has been prepared to identify the items
required in the test mode used in the 07Visual Product
production process.
1-2. Scope of applications
This document is applicable to models that are listed in Table
1-2-1.
Class
Series
Model Name
Destination
MID
KVT
KVT-819DVD
K
KVT-829DVD
E
KVT-839DVD
M/V/X/R
DDX
DDX8019
K
DDX8029
E
DDX8039
M/V/X/R
KOS
KOS-V1000
K/E/M
LOW
KVT
KVT-719DVD
K
KVT-729DVD
E
KVT-739DVD
M/V/X/R
DDX
DDX7019
K
DDX7029
E
DDX7039
M/V/X/R
KOS
KOS-V500
K/E/M
DNX
DNX7100
K
DNX7200
E
−
F-MONITOR
KOS-L702
K/E/M
Table 1-2-1 List of Models in 07Visual Product
1-3. Overview
The following sections describe display specifications,
control specifi cation of key/remote controller, operations of
components, etc. in the test mode of 07Visual Product.
2. Test mode specifi cation
2-1. Operations
Product can be transferred into the test mode using the
following three approaches:
q
While pressing [SRC] and [ATT] keys at the same time
(SRC+ATT), press Reset key to start the system. (In the
KOS series, press [MODE] and [VOL.UP] keys)
w
Connect the region-writing jig to Lx connector and press
[Reset] key to start the system.
e
Connect unit/BOX designed for use exclusively in the test
mode and press [Reset] key to start the system.
r
Connect BOX/Monitor designed for use exclusively in the
test mode and press [Reset] key to start the system.
t
When in standby source, use “AUD SW” on the remote
controller to enter Tenkey1
→
6
→
3
→
4
→
2 in order to
transfer to the test mode.
• Step
e
is only applicable to KVT series.
• Step
r
is only applicable to KOS series (including KOS
Monitor). [Reset] key can be used for both Monitor and
Box.
• In addition to unit/BOX (
e
/
r
), X14 (System µ-com:
Special µ-com) is also designed exclusively for X88 FCT.
2-2. Screen transition
During the test mode, selecting Graphic screen transfers the
screen to Test Mode Main screen.
A variety of screens that can be transferred from Test Mode
Main screen is shown in Figure 2-2-1.
Refer to Section 2-3 for functions in each screen. (Note that
screens that can be transferred from Test Mode Main screen
vary depending on the model.)
Test Mode Main
Information
Source
Source
Direct
Set Up
Set Up
Menu
Audio
Audio
Control
E2PROM
Write
Touch
Touch
Adjust
E2PROM
Write
HPOSI
Graphic/DVD
/VIDEO/TV/
NAVI/iPod etc.
E2PROM
Write
Auto
Adjust
Each Auto
Adjust
E2PROM
Write
Mecha
Adjust
Inverter
Check
iPod
Check
Service
Serial/Tuner
etc.
iPod
Inverter
Tilt
MECHA
Figure 2-2-1 Screens transferred from Test Mode Main screen
TEST MODE
