— 40 —
E
nglis
h
M ake sure that the unit is installed securely in place. If the unit is
unstable, it may malfunction (eg, the sound may skip).
N OTE
Bend the tabs of the
mounting sleeve w ith
a screw driver or
similar utensil and
attach it in place.
M etal mounting
strap
(commercially
available)
Self-tapping
screw
(commercially
available)
Firew all or metal support
Accessory
3
Installation
■
Inst allt ion
To attach this unit, fit it into the mounting sleeve by pressing the four
corners of the hard rubber frame.
Do not apply strong pressure to other sections than the corners;
otherw ise troubles such as the impossibility of opening or closing the
panel may result.
2
CA U TION
Connect ing Cables t o Term inals
Connecting the ISO Connector (see p.39)
The pin arrangement for the ISO connectors depends on the type
of vehicle you drive. M ake sure to make the proper connections to
prevent damage to the unit.
The default connection for the w iring harness is described in
1
below . If the ISO connector pins are set as described in
2
or
3
,
make the connection as illustrated.
2
WA RN IN G
Unit
Vehicle
Ignition cable (Red)
Battery cable (Yellow )
A–7 Pin (Red)
A–4 Pin (Yellow )
Unit
Vehicle
Ignition cable (Red)
Battery cable (Yellow )
A–7 Pin (Red)
A–4 Pin (Yellow )
Unit
Vehicle
Ignition cable (Red)
Battery cable (Yellow )
A–4 Pin (Yellow )
1
(Default setting) The A-7 pin (red) of the vehicle' s ISO
connector is linked w ith the ignition, and the A-4 pin (yellow ) is
connected to the constant pow er supply.
2
The A-7 pin (red) of the vehicle' s ISO connector is connected to
the constant pow er supply, and the A-4 pin (yellow ) is linked to
the ignition.
3
The A-7 pin (red) of the vehicle' s ISO connector is not
connected to anything, w hile the A-4 pin (yellow ) is connected
to the constant pow er supply (or both the A-7 (red) and A-4
(yellow ) pins are connected to the constant pow er supply).
Connect to a pow er source that can be
turned on and off w ith the ignition key.
http://www.usersmanualguide.com/
