— 28 —
E
nglis
h
Disc control features
(See page 7)
D isc N am e Preset Play (D N PP)
If you have preset the name of a disc that you w ant to listen
to in the disc changer, you can look for it by name and start
playing it.
Press the DNPP button on the remote control.
"DNP PLAY" w ill appear in the display, and the disc name
preset play mode is entered.
The preset names/disc titles of the disc in the disc changer to
w hich you are currently listening are successively displayed for
five seconds each.
In any of the units that are connected, discs that have not been
disc name preset w ill display "NO NAM E".
•
This function can only be used in disc changers that w ere
manufactured or sold as of 1997. Also note that some units
cannot provide a display unless the disc name preset has been
made by the unit that is playing.
•
Discs in the disc changer that have never been played before
w ill appear as "NO ACCESS" w hen the disc names are
displayed. When you cannot identify a disc because of the "NO
ACCESS" display after inserting a disc magazine, try playing it
using the disc scan or a similar function to display the disc
name. Also note that "NO DISC" w ill be displayed w hen a disc
has not been loaded.
Rapid display (forw ard / reverse):
Press the DISC
+
or DISC
–
button.
Pressing the DISC
+
button w ill rapidly display the preset
names/disc titles in order.
Pressing the DISC
–
button w ill rapidly display the preset
names/disc titles in reverse order.
When the name appears for the disc you w ant to play
Press the OK button.
The disc w hose name is displayed w ill be recalled, and the disc
name preset play (DNPP) mode w ill end.
To cancel DNPP mode:
Press the DNPP button.
The disc name preset play (DNPP) mode w ill be cancelled.
2
N OTE
1
Function of Rem ote control w ith DNPP button (See page 8)
http://www.usersmanualguide.com/
