26 English
English
Route Options
Route Preferences
The function allows settings to be made for the roads to be used and to start route calculation.
1
Each time a button is selected it will toggle between usage
and non-usage of the corresponding roads or ferries.
2
Select .
•
can be selected during route guidance.
• The route will not necessarily follow the specified conditions.
Destination & Way Points
The destination or way points used in route calculation can be changed using this function.
■
Addition of way points
The following procedure can be used to add new way points to the current route for calculation.
1
Select .
2
Set the way point using your preferred method.
When a new destination is set by
(Destination), it will replace
the current destination and route calculation will be carried out once
again.
3
When the required way points have been setup, indicate
the order in which they are to be visited.
Choose the location to be added, and then select
.
4
Select .
• When a new destination is set by
(Destination), it will replace the current destination and route calculation
will be carried out once again.
• Step 3 is required when setting the 2nd way point and more after.
• Repeat step 1 and 3 until all desired way points have been set.
3
(Route Options)
3
(Route Pref.)
Before Steps
3
(Route Options)
3
(Dest. & Way Pt.)
Before Steps
KNA-DV3200(E)_ENG r8 03.7.7 7:43 PM Page 26
