4
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Set the clock and date
1
Press the volume knob to enter [
FUNCTION
].
2
Turn the volume knob to select [
CLOCK
], then press the knob.
To adjust the clock
3
Turn the volume knob to select [
CLOCK ADJUST
], then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Hour Minute
5
Turn the volume knob to select [
CLOCK FORMAT
], then press the knob.
6
Turn the volume knob to select [
12H
] or [
24H
], then press the knob.
To set the date
7
Turn the volume knob to select [
DATE FORMAT
], then press the knob.
8
Turn the volume knob to select [
DD/MM/YY
] or [
MM/DD/YY
], then press
the knob.
9
Turn the volume knob to select [
DATE SET
], then press the knob.
10
Turn the volume knob to make the settings, then press the knob.
Day Month Year or Month Day Year
11
Press and hold
to exit.
To return to the previous setting item, press
.
Set the initial settings
1
Press
repeatedly to enter STANDBY.
2
Press the volume knob to enter [
FUNCTION
].
3
Turn the volume knob to select an item (see the following table),
then press the knob.
4
Repeat step
3
until the desired item is selected or activated.
5
Press and hold
to exit.
To return to the previous setting item, press
.
2
Default:
XX
AUDIO CONTROL
SWITCH
PREOUT*
REAR
/
SUB-W
: Selects whether rear speakers or a subwoofer are
connected to the line out terminals on the rear (through an external
amplifier).
TUNER SETTING
PRESET TYPE
NORMAL
: Memorizes one station for each preset button in each band
(FM1/ FM2/ FM3/ MW/ LW). ;
MIX
: Memorizes one station for each
preset button, regardless of the selected band.
SYSTEM
KEY BEEP*
ON
: Activates the keypress tone. ;
OFF
: Deactivates.
SOURCE SELECT
BUILT-IN AUX
ON
: Enables AUX in source selection. ;
OFF
: Disables. (
14
)
P-OFF WAIT
Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in
standby mode) to save the battery.
20M
: 20 minutes ;
40M
: 40 minutes ;
60M
: 60 minutes ;
– – –
: Cancels
F/W UPDATE
UPDATE SYSTEM
F/W UP xx.xx
YES
: Starts upgrading the firmware. ;
NO
: Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
www.kenwood.com/cs/ce/
FACTORY RESET
YES
: Resets the settings to default (except the stored station). ;
NO
: Cancels.
*
Not applicable if 3-way crossover is selected.
3
GETTING STARTED
JS_KWD_KMM_BT302_EN_EN_2.indd 4
JS_KWD_KMM_BT302_EN_EN_2.indd 4
12/10/2015 5:15:14 PM
12/10/2015 5:15:14 PM
