ENGLISH
17
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
DISPLAY SETTINGS
Set the dimmer
Press and hold
DISP (DIMMER)
to turn on or off the dimmer.
• If you have set [
DIMMER TIME
], it will be canceled once you press and
hold this button.
Other settings
1
Press the volume knob to enter [
FUNCTION
].
2
Turn the volume knob to select [
DISPLAY
], then press the knob.
3
Turn the volume knob to select an item (see the following table),
then press the knob.
4
Repeat step
3
until the desired item is selected/activated or follow
the instructions stated on the selected item.
5
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
XX
DIMMER
Dim the display illumination.
ON
: Dimmer is turned on. ;
OFF
: Cancels.
DIMMER TIME
: Set the dimmer on and off time.
1
Turn the volume knob to adjust the [
ON
] time, then press the knob.
2
Turn the volume knob to adjust the [
OFF
] time, then press the knob.
(Default: [
ON
]:
18:00
; [
OFF
]:
6:00
)
BRIGHTNESS
0
—
31
: Select your preferred brightness level for display illumination.
TEXT SCROLL
AUTO
/
ONCE
: Select whether to scroll the display information
automatically, or scroll only once. ;
OFF
: Cancels.
TROUBLESHOOTING
Symptom
Remedy
General
Sound cannot be heard.
•
Adjust the volume to the optimum level.
•
Check the cords and connections.
“MISWIRING CHECK WIRING
THEN PWR ON” appears.
Turn the power off, then check to be sure the
terminals of the speaker wires are insulated
properly. Turn the power on again.
“PROTECTING SEND SERVICE”
appears.
Send the unit to the nearest service center.
•
Sound cannot be heard.
•
The unit does not turn on.
•
Information shown on the
display is incorrect.
Clean the connectors. (
19
)
The unit does not work at all.
Reset the unit. (
3
)
Radio
•
Radio reception is poor.
•
Static noise while listening to
the radio.
Connect the antenna firmly.
USB / iPod
“READING” keeps flashing.
Do not use too many hierarchical levels or folders.
Elapsed playing time is not
correct.
This is caused by how the files are recorded.
“LOADING” appears when you
enter search mode by pressing
.
This unit is still preparing the iPod/iPhone music
list. It may take some time to load, try again later.
Correct characters are not
displayed (e.g. album name).
•
This unit can only display uppercase letters,
numbers, and a limited number of symbols.
•
Depending on the display language you have
selected (
5
), some characters may not be
displayed correctly.
JS_KWD_KMM_BT302_EN_EN_2.indd 17
JS_KWD_KMM_BT302_EN_EN_2.indd 17
12/10/2015 5:15:17 PM
12/10/2015 5:15:17 PM
