ENGLISH
23
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
REMOTE CONT
STEERING WHEEL
REMOTE INPUT
P. CONT
ANT CONT
MUTE
Wiring connection
When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid
damaging the unit.
If your car does not have an ISO terminal :
We recommend installing the unit with a commercially available custom wiring harness specific
for your car and leave this job to professionals for your safety. Consult your car audio dealer.
Fuse (10 A)
Rear/ Subwoofer output
F
or 3-way crossover: Woofer output
Antenna terminal
Light blue/yellow
(Steering remote control
wire)
To the steering wheel remote
control adapter
Blue/White
(Power control wire/
Antenna control wire)
Brown
(Mute control wire)
To the power control terminal
when using the optional power
amplifier or to the antenna
control terminal in the vehicle
To connect the Kenwood
navigation system, refer your
navigations manual
Yellow (A4)
Red (Ignition wire)
Red (A7)
Yellow (Battery wire)
Pin
Color and function
A4
Yellow
:
Battery
A5
Blue/White
:
Power control
A7
Red
:
Ignition (ACC)
A8
Black
:
Earth (ground) connection
B1
Purple
]
:
Rear speaker (right)
For 3-way crossover: Tweeter (right)
B2
Purple/black
[
B3
Gray
]
:
Front speaker (right)
For 3-way crossover: Mid range speaker (right)
B4
Gray/black
[
B5
White
]
:
Front speaker (left)
For 3-way crossover: Mid range speaker (left)
B6
White/black
[
B7
Green
]
:
Rear speaker (left)
For 3-way crossover: Tweeter (left)
B8
Green/black
[
ISO connectors
Connecting the ISO connectors on some VW/Audi or Opel
(Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring harness as
illustrated below.
Unit
Vehicle
A7 (Red)
Ignition wire (Red)
A4 (Yellow)
Default wiring
Battery wire (Yellow)
If no connections are made, do not let the wire come out from
the tab.
Microphone input
jack
(
9
)
JS_KWD_KMM_BT302_EN_EN_2.indd 23
JS_KWD_KMM_BT302_EN_EN_2.indd 23
12/10/2015 5:15:19 PM
12/10/2015 5:15:19 PM
