16
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
INSTALLATION / CONNECTION
Part list for installation
(B)
Trim plate
(C)
Mounting sleeve
(E)
Wiring harness
(D)
Extraction key
Do the required wiring.
(
17
)
Dashboard of
your car
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
How to remove the unit
1
Detach the faceplate.
2
Fit the catch pin on the extraction
keys into the holes on both sides
of the trim plate, then pull it out.
3
Insert the extraction keys deeply
into the slots on each side, then
follow the arrows as shown on the
right.
Installing the unit (in-dash mounting)
Hook on the top side
Orientate the trim plate as
illustrated before fitting.
When installing without the mounting sleeve
1
Remove the mounting sleeve and trim plate from the unit.
2
Align the holes in the unit (on both sides) with the vehicle
mounting bracket and secure the unit with screws
(supplied).
The following screws are supplied:
Round head screws (M5 × 8 mm)
× 4
To secure the mounting
bracket
Flat head screws (M5 × 8 mm)
× 4
Sems screws (M4 × 8 mm)
× 1
To secure the ground
wire (black)
Use only the specified screws. Using wrong screws might damage the unit.
(A)
Faceplate
JS_KWD_KMM_202_MN_EN_2.indd 16
JS_KWD_KMM_202_MN_EN_2.indd 16
10/7/2015 8:50:48 AM
10/7/2015 8:50:48 AM
