ENGLISH
11
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
AUDIO SETTINGS
While listening to any source...
1
Press
AUD
to enter [
AUDIO CONTROL
] directly.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press and hold
to exit.
(or using RC-406)
1
Press
AUD
to enter [
AUDIO CONTROL
].
2
Press
J
/
K
to select an item, then press
.
To return to the previous setting item, press
.
Default:
XX
SUB-W LEVEL
–15
to
+15
(
0
)
Adjusts the subwoofer output level.
BASS LEVEL
–8
to
+8
(
+2
)
Adjusts the level to memorize for each source. (Before
making an adjustment, select the source you want to
adjust.)
MID LEVEL
–8
to
+8
(
+1
)
TRE LEVEL
–8
to
+8
(
+1
)
EQ PRO
(This setting is stored to [
USER
].)
BASS ADJUST BASS CTR FRQ
60
/
80
/
100
/
200
: Selects the center frequency.
BASS LEVEL
–8
to
+8
(
+2
): Adjusts the level.
BASS Q FACTOR 1.00
/
1.25
/
1.50
/
2.00
: Adjusts the quality factor.
BASS EXTEND
ON
: Turns on the extended bass. ;
OFF
: Cancels.
MID ADJUST
MID CTR FRQ
0.5K
/
1.0K
/
1.5K
/
2.5K
: Selects the center frequency.
MID LEVEL
–8
to
+8
(
+1
): Adjusts the level.
MID Q FACTOR
0.75
/
1.00
/
1.25
: Adjusts the quality factor.
TRE ADJUST
TRE CTR FRQ
10.0K
/
12.5K
/
15.0K
/
17.5K
: Selects the center frequency.
TRE LEVEL
–8
to
+8
(
+1
): Adjusts the level.
PRESET EQ
DRIVE EQ
/
TOP40
/
POWERFUL
/
ROCK
/
POPS
/
EASY
/
JAZZ
/
NATURAL
/
USER
: Selects a preset equalizer suitable to the music
genre. (Select [
USER
] to use the settings made in [
EQ PRO
].)
[
DRIVE EQ
] is a preset equalizer that reduces noise outside the car or
running noise of the tyres.
BASS BOOST
LV1
/
LV2
/
LV3
: Selects your preferred bass boost level. ;
OFF
: Cancels.
LOUDNESS
LV1
/
LV2
: Selects your preferred low and high frequencies boost to
produce a well-balanced sound at a low volume level. ;
OFF
: Cancels.
SUBWOOFER SET
ON
: Turns on the subwoofer output. ;
OFF
: Cancels.
LPF SUBWOOFER
THROUGH
: All signals are sent to the subwoofer. ;
85HZ
/
120HZ
/
160HZ
: Audio signals with frequencies lower than 85 Hz/ 120 Hz/
160 Hz are sent to the subwoofer.
SUB-W PHASE
REVERSE
(180°)/
NORMAL
(0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum
performance. (Selectable only if a setting other than [
THROUGH
] is
selected for [
LPF SUBWOOFER
].)
FADER
R15
to
F15
(
0
): Adjusts the rear and front speaker output balance.
BALANCE
L15
to
R15
(
0
): Adjusts the left and right speaker output balance.
VOLUME OFFSET
For AUX:
–8
to
+8
(
0
) ; For other sources:
–8
to
0
: Preset the initial
volume level of each source. (Before adjustment, select the source
you want to adjust.)
SOUND RECNSTR
(Sound
reconstruction)
ON
: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are
lost in audio data compression. ;
OFF
: Cancels.
• [
SUB-W LEVEL
]/ [
SUBWOOFER SET
]/ [
LPF SUBWOOFER
]/ [
SUB-W PHASE
] is
selectable only if [
SWITCH PREOUT
] is set to [
SUB-W
]. (
4
)
• [
SUB-W LEVEL
]/ [
LPF SUBWOOFER
]/ [
SUB-W PHASE
] is selectable only if
[
SUBWOOFER SET
] is set to [
ON
].
JS_KWD_KMM_202_MN_EN_4.indd 11
JS_KWD_KMM_202_MN_EN_4.indd 11
27/7/2015 3:45:58 PM
27/7/2015 3:45:58 PM
