11
installation
5. Make sure your plumbing is suitable for
use with the dishwasher. If in doubt contact
a qualified plumber. This unit MUST BE
connected to COLD WATER MAINS
using the new water supply hose. OLD
HOSE SETS MUST NOT BE RE-USED.
The water pressure from the water mains
needs to be at a minimum of 0.04 MPa and
a maximum of 1.00MPa.
• Connect one end of the water supply
hose to your dishwasher, and then
connect the other end of the hose to
your water mains. Please ensure the
black rubber seal is in place.
• After connecting the hose, turn on your
water mains and check for leaks.
• Connect the dishwasher to the mains
socket.
* All images are for reference only; please refer to your individual unit for actual item.
• Do not bend or kink your drain hose.
You may use a Y-adaptor (not included)
for an additional water feed for another
appliance, for example a washing
machine. This is only applicable to
the cold water mains. A Y-adaptor is
available from most DIY stores.
Y-Adaptor
(not included)
safety water supply hose
water mains
Connect
to another
appliance
if required.
• You may use the U-shaped drain hose
holder to secure your drain hose and to
avoid kinking it.
U-shaped drain
hose holder
water drain hose
Kenwood Freestanding Dishwasher KDW60T18/X18 Manual.indd 11
07/06/2018 15:59