English
— 46 —
Tuner source
?
Radio reception is poor.
39
✔
The car antenna is not extended.
☞
Pull the antenna out all the way.
✔
The antenna control wire is not connected.
40
☞
Connect the wire correctly, referring to the section on
<Connecting Wires to Terminals>.
?
The desired frequency can’t be entered with the Direct Access
Tuning.
41
✔
A station that can’t be received is being entered.
☞
Enter a station that can be received.
✔
You’re trying to enter a frequency with a 0.01 MHz unit.
42
☞
What can be designated in the FM band is to 0.1 MHz.
?
It isn't the set Traffic information sound volume.
43
✔
The set sound volume is less than the tuner sound volume.
☞
If the tuner sound volume is louder than the set sound volume,the
tuner sound volume is used.
Troubleshooting Guide
?
There’s no Front High Pass Filter and Rear High Pass Filter effect.
31
✔
The Non-fading preout is being used.
☞
There’s no effect in Non-fading preout.
?
The Security Code item isn’t displayed in the Menu System.
32
✔
The Security Code function is already activated.
☞
When the Security Code function is activated it isn’t displayed in
the menu items.
?
The Touch Sensor Tone doesn’t sound.
34
✔
The preout jack is being used.
☞
The Touch Sensor Tone can’t be output from the preout jack.
?
Even though the vehicle light switch is turned ON, the unit’s display
won’t dim.
36
✔
The dimmer wire isn’t connected.
☞
Connect the dimmer wire correctly.
?
The Dimmer function doesn’t work.
38-1
✔
The Dimmer wire isn’t connected correctly.
☞
Check the Dimmer wire connection.
✔
The <Built-in Amp Mute Setting> (page 36) is ON.
100
☞
Turn it OFF.
?
AUX cannot be selected.
103
✔
<Built-in Auxiliary input Setting> is turned off.
☞
Refer to the <Built-in Auxiliary input Setting> (page 38) in the
menu setting and turn on the <Built-in Auxiliary input Setting> .
Summary of Contents for KDC-X959
Page 52: ......
