Kenwood KDC-X959, Instruction Manual

Page: 20 / 52

Selecting the display when this device is switched to internal
and optional Auxiliary input sources.
1
Select Auxiliary input source
Press the [SRC] button.
Select the "AUX" display.
2
Enter Auxiliary input display setting mode
Press the [NAME.S] button for at least 2 seconds.
The presently selected AUX Name is blinks.
3
Select the Auxiliary input display
Press the [
4
] or [
¢
] button.
Each time the button is pressed it switches through the below
displays.
Auxiliary Input Display Setting
6
Repeat steps 3 through 5 and enter the name.
7
Exit name set mode
Press the [NAME.S] button.
• When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
• Memory numbers
- FM: 32 stations
- AM: 16 stations
- Internal CD player: 30 discs
- External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
• The title of station/CD can be changed by the same operation
used to name it.
Attaching a title to a Station or CD.
1
Receive/play the station/disc you want to attach a title to
• A title can't be attached to a MD.
• Disc Naming can't be done during CD text or MP3/WMA text
display in the Character information display part
b
.
2
Enter name set mode
Press the [NAME.S] button for at least 2 seconds.
"Name Set" is displayed.
3
Move the cursor to the enter character position
Press the [
4
] or [
¢
] button.
4
Select the character type
Press the [
38
] button.
Each time the button is pressed the character type switches as
shown below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
5
Select the characters
Press the [FM] or [AM] button.
Characters can be entered by using a remote with a number
buttons.
Example: If "DANCE" is entered.
Character Button #Times pressed
"D" [#3] 1
"A" [#2] 1
"N" [#6] 2
"C" [#2] 3
"E" [#3] 2
Station/Disc Naming (SNPS/DNPS)
General features
— 20 —
English