English
|
27
Connecting Wires to Terminals
P.CONT
ANT.CONT
MUTE
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
L
R
L
R
KDC-W7541U/KDC-W7541UY
KDC-W7041U/KDC-W7141UY
REMO.CONT
Battery wire (Yellow)
Ignition wire (Red)
FM/AM antenna input (JASO)
Antenna Cord
Wiring harness
(Accessory
1
)
If no connections are made, do not
let the wire come out from the tab.
Power control/Motor antenna
control wire (Blue/White)
TEL mute wire (Brown)
Connect either to the power control terminal
when using the optional power amplifier, or to the
antenna control terminal in the vehicle.
A–7 Pin (Red)
A–4 Pin (Yellow)
Connector A
Connector B
See next page
To Kenwood disc changer/External optional accessory
Rear output/Sub Woofer output
USB connector (1m)
To USB device
Fuse (10A)
Front output
Front output
To External Display/ Steering remote
KDC-W7541U/W7041U only
AUX input (Stereo)
Use the mini-plug which is stereo type and does not have
any resistance.
Rear output
Sub Woofer output
⁄
To use the steering wheel remote control feature, you
need to an exclusive remote adapter (not supplied)
matches your car is required.
Steering remote control (Light
Blue/Yellow)
KDC-W7541UY/W7141UY only
Connect to the terminal that is grounded when
either the telephone rings or during conversation.
⁄
To connect the Kenwood navigation system,
consult your navigation manual.
⁄
Do not remove the cap when you do not use the USB
cable. The connector will cause the unit to malfunction
if it gets in touch with any metallic part of the vehicle.
B64-4049-00̲00̲E̲English.indd 27
B64-4049-00̲00̲E̲English.indd 27
08.2.5 4:25:08 PM
08.2.5 4:25:08 PM