Kenwood KDC-BT858U, Instruction Manual

Page: 83 / 100

English
|
83
Bluetooth settings
18-6. Bluetooth detail setting
You can configure the initial settings of this unit.
1
Press [
Ú
].
“BT MODE” appears and enter the Bluetooth mode.
2
Select “Settings” > “Detailed Settings” using
[Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13) .
3
Select a Bluetooth detail setting item using
[Control] knob.
Display Description
“PIN Edit” Sets the PIN code for the pairing with the
Bluetooth device.
Refer to <18-1. Registering the PIN code>
(page 80) .
“Auto Answer” Automatically answers a call after lapse of the
preset time interval.
“OFF”
: Does not answer the phone call
automatically.
“1SEC” – “ 8SEC ” – “99SEC” :
Automatically answers the phone call after lapse
of 1 – 99 seconds.
“Auto Reconnect” When set to “ON”, starts re-pairing with the
registered Bluetooth device automatically when
it becomes unpaired.
“ ON ” / “OFF”
“Auto Pairing” When set to “ON”, the Apple Auto Pairing
function is turned on to automatically register
the iPod touch or iPhone connected to this unit.
“ ON ” / “OFF”
“Bluetooth HF/Audio” Specifies the output speakers for hands-free
voice communication and Bluetooth audio
sound.
“ Front ”
: Outputs sound from the front speakers.
“All”
: Outputs sound from the front and rear
speakers.
“Call Beep” Sets whether to output a beep from the speaker
when a call comes in.
“ ON ”
: Outputs a beep.
“OFF” : Does not output a beep.
“BT F/W Update” Displays the version of the Bluetooth firmware
of this unit.
Refer to <18-4. Displaying the firmware
version> (page 82) .
“MIC Gain” Adjusts the sensitivity of the microphone for
telephone call or adjusts the voice of the caller.
“-20” – ” 0 ” – “+8”
“Echo Cancel Level” Sets the echo cancellation level.
“1” – ” 4 ” – “10”
( Colored text : Factory setting)
4
Select a setting using [Control] knob.
Returns to the previous item.
Exiting from the Bluetooth mode
Press [
Ú
].