Kenwood KDC-BT858U, Instruction Manual

Page: 50 / 100

50
|
KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858U
11. Listen to the tuner (KDC-X898, KDC-BT858U)
11-1. Listening to the radio
Selecting a tuner source
1
Press [SRC].
Enters the Source selection mode.
2
Select a Tuner (“TUNER”) source using
[Control] knob.
Refer to <Source selection> (page 14) .
Selecting a band (FM or AM)
Press [
R
].
Selecting a station
Press [
E
] or [
F
].
The seek mode can be changed. Refer to
<Selecting a Seek mode> (refer to below),
<11-
5. Tuner setting> (page 52) .
Selecting a Seek mode
Press [
S
].
Display Operation
“Auto1” Automatic search for a station.
“Auto2” Search in order of the stations in the preset memory.
“Manual” Normal manual tuning.
11-2. Station preset memory
You can store a station in the memory.
1
Press [
E
] or [
F
] to select the station.
2
Press [
1
/
6
].
Enter the Preset mode.
3
Turn [Control] knob to select a memory
number (FM: “1” – “18”, AM: “1” – “6”).
4
Press and hold [Control] knob.
Exiting from the Preset memory mode
Press and hold [
1
/
6
].
About the Mix Station preset mode
• If you press [
1
/
6
] twice in step 2, the Mix Station preset
mode is selected with “Mixed Preset List” displayed.
In this mode, different bands and tuner sources (FM, AM,
SiriusXM etc.) can be saved in the same preset layer, which
allows you to recall the desired station without switching
between bands or tuner sources.
A maximum of six stations can be preset in the Mix Station
preset mode.
Once the Mix Station preset mode is set, you can enter the
same mode by just pressing [
1
/
6
] once in step 2.
Pressing [
1
/
6
] twice allows you to return to the normal
Station preset mode.