Kenwood KDC-BT858U, Instruction Manual

Page: 57 / 100

English
|
57
Listen to the HD Radio™ tuner (KDC-X998, KDC-BT958HD)
12-7. Direct access tuning
(Function of remote control)
You can tune to a station directly by entering its
frequency or channel.
1
Press [DIRECT] on the remote control.
“– – – –” appears and enter the Direct access tuning
mode.
2
Press [DIRECT] on the remote control to Select
a direct access tuning method.
Tuning method Display
Frequency “– – – –”
Channel “HD –”
Exiting Direct Access Tuning —
3
Press the number buttons on the remote
control to enter the frequency or channel.
Example of frequency input:
Desired frequency Press button
92.1 MHz (FM) [9], [2], [1]
810 kHz (AM) [8], [1], [0]
4
Press [ENT] on the remote control.
Exiting Direct access tuning mode
Press [
6
] on the remote control.
12-8. HD Radio tuner setting
You can set the HD Radio tuner-related items.
1
Press [Control] knob.
Enters the Function setting mode.
2
Select “Settings” using [Control] knob.
3
Select a HD Radio tuner setting item using
[Control] knob.
Display Description
“IF Band”
Auto
: Increases the tuner selectivity to reduce
interference noises from adjacent stations.
(Stereo effect may be lost.)
Wide
: Subjects to interference noises from
adjacent stations, but sound quality will not be
degraded and the stereo effect will remain.
“Seek Mode” Sets the HD Radio seek mode.
Auto1
: Automatic search for a station.
Auto2 : Search in order of the stations in the
preset memory.
Manual
: Normal manual tuning control.
“Auto Memory” Memorizes 6 stations with good reception
automatically.
Refer to <12-4. Auto memory> (page 55) .
“Receive Mode” Sets the HD Radio receive mode.
Auto
: Automatically tunes to an analog
broadcast when there is no digital broadcast.
Digital
: Digital broadcasts only.
Analog : Analog broadcasts only.
“TAG Memory” Displays the tag memory usage of the HD
Radio tuner and SiriusXM tuner. Up to 50 tags
can be registered in this unit.
“Tagging” Turns ON / OFF the iTunes tag memory
function of HD Radio tuner.
“ ON ” / “OFF”
( Colored text : Factory setting)
4
Select a setting using [Control] knob.
Returns to the previous item.
Exiting from the Function setting mode
Press and hold [
1
/
6
].