15
KDC-BT6544U/BT6544UY
/BT7043U/BT742U
■
Test mode speci
fi
cations in CD source
Display mode default: P-Time
• Procedure in CD-DA media (KTD-02A)
Key
Display
Description
Track up procedure
Every time pressed, jumps to the track shown below.
No.9
→
No.15
→
No.10
→
No.11
→
No.12
→
No.13
→
No.22
→
No.14
→
No.9 (recursive)
But in case the disc has 8 tracks or less, playback starts with
track No.1. (For both CD-DA and compressed
fi
le discs)
Track down procedure
Goes down by 1 track from the currently played track.
FAV
Jump operation and
Mechanism version
display
Jump operation and Mechanism version
display (Sub-mode)
* Refer to “Jump operation and Mechanism version display” for
contents and operation of the display.
TEL/TI/
AUTO
Jump operation
Jump operation
* Toggling of jumping between tracks No. 9
and No. 22 (No.9
↔
No.22)
Jump to No. 9 when the track of No. 22 is being played back.
Jump to No. 22 when the track of No. 9 is being played back.
• Jump operation and Mechanism version display (Sub-mode)
* When operating the jump operation of the track while the mechanism information in this sub-mode, the track number is dis-
played for the speci
fi
c period of time (prior to any other information) and then the mechanism information is displayed again.
Key
Display
Description
FM
Jump operation
This operation is operational only in the “Jump
operation and Mechanism version display” during
CD source.
Jump to No. 28. (Scratch 0.7mm for MUSIC line vibration
testing)
AM
Jump operation
This operation is operational only in the “Jump
operation and Mechanism version display” during
CD source.
Jump to No. 14. (Disc whose surface is not perfectly
fl
at:
TCD-731RA Tr14)
FAV
Information display
Mechanism
μ
-com
version
9
B
3
0 :
Display of Mechanism model name and Mechanism ver-
sion (Pressing the key while the indication in the left cell
is shown is to change to the mechanism servo version
display.)
Information display
Mechanism servo
version
S
E
R
V :
Mechanism servo table version display (Pressing the key
while the indication in the left cell is shown is to change
to the mechanism boot program version display.)
Information display
Mechanism boot
program version
B
O
O
T :
Mechanism boot program version display (Pressing the
key while the indication in the left cell is shown is to
change to the normal display.)
TEL/TI/
AUTO
Jump operation
This operation is operational only in the “Jump
operation and Mechanism version display” during
CD source.
Jump to No.15.
Set the volume value to 25. (For 20Hz 0dB DC protection
error operation FCT checking)
• Operations with the compressed media
Key
Display
Description
File format display (MP3)
M
P
3
Display
fi
le format just before the start of
fi
le play
back.
File format display (WMA)
W
M
A
File format display (AAC)
A
A
C
TEST MODE
