18
KDC-BT6544U/BT6544UY
/BT7043U/BT742U
■
Clearing DC offset error detection data (E2PROM data clearing)
Procedure
Note
Resetting while [PLAY/PAUSE] + [FAV] is being pressed
Entering DC offset error display mode.
While “----” is displayed, power can be ON.
Even if the DC offset error detection is running, it shall be possible to move to this condition.
This mode is cleared when the unit is reset. (The last status is not held)
Procedure
Display
Description
Initial display
D
C
E
R
R
When DC offset error is detected (when either one of capacitors is
leaking, or an improper connection or another error is detected)
D
C
O
K
When DC offset error is not detected (when none of capacitors leak,
no improper connection or other error is detected)
SEARCH
D
C
1
E
R
R
When improper connection or other DC offset errors are detected.
D
C
1
O
K
When improper connection or other DC offset errors are not detected.
■
SEARCH
D
C
1
O
K
When detecting improper connection or other DC offset errors, clears
detection data. (Clear E2PROM)
FAV
D
C
2
4
When detecting capacitor leak, provides information on the number of
capacitor leaks. (0~4)
■
FAV
D
C
2
0
When detecting capacitor leak, clears the number of capacitor leaks.
(Clear E2PROM)
This mode is cancelled by resetting. (The last screen will not be retained.)
■
FM/AM channel space switching (Only for models of destination “K” and “M”)
Procedure
Note
While Power OFF, press and hold [TEL/TI/AUTO] key and [SEARCH]
key, and press [SRC] key to Power ON
FM200kHz/AM10kHz
↔
FM50kHz/AM9kHz
FM50kHz/AM10kHz
↔
FM200kHz/AM10kHz
■
Security
• Method to clear the security code
Procedure
Display
Description
Press and hold [
] key for 3 seconds
while [TEL/TI/AUTO] key is being pressed
C
O
D
E
–
–
–
–
Carry out the procedure while “– – – –” is
being displayed.
C
O
D
E
“– – – –” disappears.
Press the remote control key 5 twice to
display “K” and then press [
] key.
C
O
D
E
K
Press the remote control key 2 three times
to display “C” and then press [
] key.
C
O
D
E
K
C
Press the remote control key 2 once to
display “A” and then press [
] key.
C
O
D
E
K
C
A
Press the remote control key 7 twice to
display “R” and then press [
] key.
C
O
D
E
K
C
A
R
A
P
P
R
O
V
E
D
Security cancelled. (If wrong character is
input, code request mode is displayed.)
TEST MODE
