16
KDC-BT6544U/BT6544UY
/BT7043U/BT742U
■
Audio-related test mode
Procedure
Note
■
TEL/TI/AUTO
Enter the audio adjustment mode (The default items shown are different from model with DSP to model without DSP)
[Model with DSP] (Destination “K” and “E”)
When DUAL ZONE is ON: BYPASS
→
DUAL ZONE
→
FADER
→
BALANCE
→
R-VOLUME
→
V-OFFSET
When DUAL ZONE is OFF: BYPASS
→
DUAL ZONE
→
FADER
→
BALANCE
→
SUB-W
→
V-OFFSET
[Model without DSP] (Destination “M”)
When DUAL ZONE is ON: DUAL ZONE
→
FADER
→
BALANCE
→
BASS
→
MID
→
TRE
→
R-VOLUME
→
B.BOOST
→
USER
→
HPF-F
→
HPF-R
→
V-OFFSET
When DUAL ZONE is OFF: DUAL ZONE
→
FADER
→
BALANCE
→
BASS
→
MID
→
TRE
→
SUB-W
→
B.BOOST
→
USER
→
HPF-F
→
HPF-R
→
LPF-SW
→
V-OFFSET
About audio adjustment items (include both Audio Function Mode and Audio Setup Mode)
Procedure
Item
Procedure
Description
For item
forwarding
procedure,
press [AUD]
key and
[FM] key
BYPASS *1 (Only in model with
DSP)
[VOL] knob and [
/
] key
BYPASS
↔
THROUGH (Default value: BYPASS)
Dual Zone
[VOL] knob and [
/
] key
Adjust to 2 steps of OFF
↔
ON. (Default value: OFF)
Fader
[VOL] knob and [
/
] key
Adjust to 3 steps of R15
↔
0
↔
F15. (Default value: 0)
Balance
[VOL] knob and [
/
] key
Adjust to 3 steps of L15
↔
0
↔
R15. (Default value: 0)
R-VOLUME
[VOL] knob and [
/
] key
Adjust to 2 steps of 0
↔
35. (Default value: 35)
Bass Level
[VOL] knob and [
/
] key
Adjust to 3 steps of -8
↔
0
↔
+8. (Default value 0)
Middle Level
[VOL] knob and [
/
] key
Adjust to 3 steps of -8
↔
0
↔
+8. (Default value 0)
Treble Level
[VOL] knob and [
/
] key
Adjust to 3 steps of -8
↔
0
↔
+8. (Default value 0)
HPF Front (KDC-BT7043U only)
[VOL] knob and [
/
] key
Adjust to 2 steps of Through
↔
180Hz.
(Default value: Through)
HPF Rear (KDC-BT7043U only)
[VOL] knob and [
/
] key
Adjust to 2 steps of Through
↔
180Hz.
(Default value: Through)
For item
forwarding
procedure,
press [AUD]
key and
[FM] key
LPF Subwoofer
[VOL] knob and [
/
] key
Adjust to 2 steps of 60Hz
↔
Through.
(Default value: Through)
LPF Subwoofer Phase
(KDC-BT7043U only)
[VOL] knob and [
/
] key
Adjust to 2 steps of Normal
↔
Reverse.
(Default value: Normal)
Volume Offset
[VOL] knob and [
/
] key
Adjust to 2 steps of -8
↔
0 . (Default value 0)
Bass BOOST
[VOL] knob and [
/
] key
Adjust to 2 steps of OFF
↔
ON . (Default value OFF)
*1: Display the settings for “BYPASS ON/OFF” in the AUDIO adjustment mode of the test mode to enable the selection opera-
tion. These settings are same as the BYPASS settings of DSP setting in the multi-function.
■
[ATT] key operation
Procedure
Note
Press [ ] key brie
fl
y in the Tuner source.
ATT OFF/ON
■
MENU-related test mode
* In the TUNER source, run the unit in the normal operation (PRESET call operation) mode.
Procedure
Note
Press [SEARCH] key brie
fl
y (Unit itself)
Press [DNPP/SBF] key and [DIRECT] key brie
fl
y (Remote controller)
Continuous forwarding by remote control is prohibited
TEST MODE
