26
EN
The remote control supplied w ith this amplifier is also
capable of cont rolling com ponent s from a variet y of
manufacturers once you register the appropriate setup codes
into the remote control unit.
Low battery w arning
Replace all tw o batteries w ith new ones w hen you notice a shortening
of the distance from w hich the rem ote control w ill operate. The
remote control is designed to retain setup codes in memory w hile you
change batteries.
Registering setup codes for other components
Refer to below list about the components w hich can be
registered to INPUT SELECTOR keys of the remote control.
You can register to the
‡
marked INPUT SELECTOR keys of
the remote control.
VIDEO
‡
TV
‡
Satellite
‡
Cable
‡
DVD player
‡
CD player
‡
1
Find the setup code of the component to be registered.
• Ref er t o t he set up code list s t o f ind t he set up code f or t he
component to be registered.
•
Example: To register a DVD made by KENWOOD, you w ould enter
“ 005” .
Input
Component
M aker
Code
Key
(DVD)
DVD player
KENWOOD
005
DVD/CD
2
Registering components for the remote control.
1
During press and hold the ENTER key, press one of the INPUT
SELECTOR key or TV key w hich you w ant to register.
• LED w ill blink tw ice as confirmation.
2
Press the Numeric keys to enter the three-digit setup code.
• LED w ill blink once as confirmation.
Basic remote control operations for other components
Checking the codes .
If you w ant to know w hich number w as set.
1
After registering the setup code, press and hold the ENTER
key and then press the INPUT SELECTOR key.
• LED w ill blink tw ice as confirmation.
2
Press the ON SCREEN key.
• LED w ill blink according to first, second and third digit for the current
setup code.
• In case of digit 0, the LED w ill blink ten times.
Example : If the registered SETUP code is “ 028” , the LED w ill blink
ten times, tw o times and eight times.
• If t he
ON SCREEN key is not pressed w ithin ten second, this
function w ill be cancelled.
Note
Although each setup code is designed to w ork w ith a num ber of
different models, certain codes may not w ork w ith some models.
(Also, certain codes may only operate some of the functions available
on a given model.)
If no response after registering setup codes.
1
During press and hold the ENTER key, press any of the INPUT
SELECTOR keys or TV key w hich you w ant to register.
• LED w ill blink tw ice as confirmation.
2
Press the
5
key until the component you w ant to control turns
on.
3
Press the ENTER key.
• If you press the
5
key after turn on the component you w ant to
control, press
∞
key to return to previous step.
3
Press the registered INPUT SELECTOR key and then press the
SOURCE
key to check that the component you w ant to
control turns on or press the TV
key to check that the TV
turns on.
If the component does not react, and there is more than one
setup code, enter another setup code and try again.
• If the component is already on, pressing the
SOURCE
key w ill
turn it off.
4
Repeat steps
2
to
3
to register additional components until
POWER
TV
5¥∞¥2¥3
ON SCREEN
SOURCE
ENTER
INPUT SELECTOR
Numeric keys
INPUT SELECTOR
keys
DVD/ CD VIDEO1 VIDEO2 TV
名称未設定-
1 2
