Kenwood HD20GA7 Instruction Manual Download Page 30

Page: 30 / 85

PLAYER

Application section

Registration of [FAVORITE]

Checking [FAVORITE] data

With the Home view displayed, press the multi-control (Up/Down) button to select [FAVORITE],

and press the multi-control (Right) button.

The list of audio data registered as [

REG. FAVORITE

]

data is displayed.

POINT :

To deregister an item of [

FAVORITE

] data, display the list of [

FAVORITE

] data, select the audio data to be

deregistered, press the / button to open the [

MENU

] view and select [

ERASE FAVORITE

After the player is reset or turned off because the battery is exhausted, the [

FAVORITE

] data set

when the player was last connected to the PC will be recalled the next time the player is used.

✍

[

Resetting the player

]

Playing all of the audio data registered as [FAVORITE] data

With the Home view displayed, press the multi-control (Up/Down) button to select [FAVORITE],

and press the multi-control (Center) button.

All of the audio data registered as [

REG. FAVORITE

]

data are played back.

An item of audio data can be played back by selecting it
with the multi-control (Up/Down) button and then press-
ing the multi-control (Center) button.

Summary of Contents for HD20GA7






















































































Search results

Summary of Contents for HD20GA7

Reviews:

Kenwood HD20GA7, Instruction Manual, Page: 30 / 85

Search results

Summary of Contents for HD20GA7

Reviews: