Kenwood DVT-6200 Page 11 Instruction Manual Download

Page: 11 / 60

Preparations

DVT-6200 (EN/K,E,X)

System Connections

Caution:

Do not plug in the power lead until all connec-
tions are completed.

Make connections as shown below.
When connecting the related system components, refer also
to the instruction manuals of the related components.

Caution

Be sure to adhere followings. Or proper ventilation will be blocked causing damage or
fire hazard.

Do not place any objects impairing heat radiation onto the top of unit.

Leave a space around the unit (from the largest outside dimension including pro-
jection) equal or greater than, shown below.

Top panel : 50 cm Side panel : 10 cm Back panel : 10 cm

Malfunction of microcomputer

If operation is not possible or erroneous
display appears even though all connec-
tions have been made properly, reset the
microcomputer referring to “In case of

difficulty”.

Loudspeakers

Front
speaker L

Subwoofer

Surround
speaker
L

Front
speaker R

Surround
speaker
R

Center speaker

Excessive insertion of the cable
can cause defective contact.

Note

*5386/01-17/EN/J

03.7.8, 11:05 AM

Page 11

Adobe PageMaker 6.5J/PPC

Summary of Contents for DVT-6200





























































Search results

Summary of Contents for DVT-6200

Reviews:

Related manuals for DVT-6200

Brands by name

Popular brands

Kenwood DVT-6200, Instruction Manual

Search results

Summary of Contents for DVT-6200

Reviews:

Related manuals for DVT-6200

Brands by name

Popular brands