Kenwood DVT-6200 Instruction Manual Download Page 14

Page: 14 / 60

Preparations

DVT-6200 (EN/K,E,X)

Connecting to Audio video equipments

Audio cords

COMPOSITE video cords

Audio cords

Play

Record

Play

DTS disclaimer clause

DTS Digital Surround™ is a discrete 5.1 channel digital audio format available on CD, LD, and DVD software which

consequently cannot be decoded and played back inside most CD, LD, or DVD players. For this reason, when DTS-

encoded software is played back through the analog outputs of the CD, LD, or DVD player, excessive noise will be

exhibited. To avoid possible damage to the audio system, proper precautions should be taken by the consumer if the

analog outputs are connected directly to an amplification system. To enjoy DTS Digital Surround™ playback, an external

5.1 channel DTS Digital Surround™ decoder system must be connected to the digital output (S/P DIF, AES/EBU, or

TosLink) of the CD, LD or DVD player.

This unit is equipped with DTS Digital Surround™ decoder.

Note

System Connections

Recording from the VCR OUT terminal of this unit is only possible when the LISTEN MODE is set to STEREO.

*5386/01-17/EN/J

03.7.8, 11:05 AM

Page 14

Adobe PageMaker 6.5J/PPC

Summary of Contents for DVT-6200





























































Search results

Summary of Contents for DVT-6200

Reviews:

Related manuals for DVT-6200

Brands by name

Popular brands

Kenwood DVT-6200, Instruction Manual

Search results

Summary of Contents for DVT-6200

Reviews:

Related manuals for DVT-6200

Brands by name

Popular brands