Kenwood DVF-9010 Instruction Manual Download Page 59

Page: 59 / 60

DVF-9010 (En/E)

Preparations

Operations

Other

A viewing restriction (RATING) has been set for
the disc.

You have forgotten the viewing restriction (RAT-
ING) password.

The DVD disc being played does not contain the
recording of the selected voice or subtitle lan-
guage.

The function for displaying message on the TV
screen (On-Screen Messages) is set to off.

The menu language function (MENU) is not set.

The surround speakers are set to “Not used” in
the speaker mode [8 Speaker Setting].

The operation is inhibited. Please try another
operation.

The inhibition icon is displayed
and remote control is not pos-
sible.

Playback is restricted intentionally by the soft-
ware producer.

In case of difficulty

DVD player unit

Check the viewing restriction level (RATING)
setting.

Set the initial setup to the factory setup with
the following procedure.
While holding the

key, press and hold the

key until

“INITIAL OK!”

appears.

Use a DVD disc containing the recording of
the selected voice or subtitle language.

Set On-Screen Messages to on.

Set the disc menu language function (MENU)
as required.

Set the surround speakers to “Used” in the
speaker mode setting of initial setup [8
Speaker Setting].

Playback will not start even after a title is
selected.

The viewing restriction level (RATING) can-
not be changed.

The voice or subtitle language selected in
the initial setting is not played.

No message appears on the TV screen after
a key is pressed.

Menu screen messages are not shown in the
desired language.

Audio is not reproduced in surround sound.

Remedy

Cause

Symptom

Remote control unit

Symptom

Cause

Remedy

Remote control operation is not possible.

Batteries are exhausted.

The remote control is too far away from the
system, the controlling angle is deviated or
there is an obstacle in between.

Replace with new batteries.

Operate the unit inside the remote control-
lable range.

Symptom

Cause

Remedy

Inhibition icon

Summary of Contents for DVF-9010





























































Search results

Summary of Contents for DVF-9010

Reviews:

Related manuals for DVF-9010

Brands by name

Popular brands

Kenwood DVF-9010, Instruction Manual

Search results

Summary of Contents for DVF-9010

Reviews:

Related manuals for DVF-9010

Brands by name

Popular brands