50
DVF-9010 (En/E)
Preparations
Operations
Other
Changing initial setup [8 Speaker Setting]
Setting details
[Speaker mode setting]
This item allows you to set up whether each speaker type is used or
not in your system as well as the size of each speaker type.
The factory setup is as shown below.
÷
Front speakers (L/R)
: Speakers displayed (Normal)
÷
Center speaker
: Speaker displayed (Normal)
÷
Subwoofer
: Speaker displayed
÷
Surround speakers (L/R)
: Speakers displayed (Normal)
[Delay time setting]
This item allows you to provide the audio from the center and
surround speakers with delay effects to set their positions virtually
to the ideal positions. The factory setup is “0 ms” for both types of
speakers.
[Test]
This item allows you to output the built-in test signal from the
speakers. Use the test signal for setting the balance between
channels.
[Channel balance setting]
This item allows you to adjust the output level of each type of
speaker using the built-in test signal.
The output level must be adjusted from the listening position.
The factory setup is “0 dB” for all types of speakers.
1
The speaker setting made in the following is applicable only for Dolby Digital (AC-3) playback.
Changing the initial setup
ENTER
¡
1
8
2
RC
Select the item to be set.
1
Select an item with the joystick (
%
,
fi
,
@
,
#
).
2
Press the ENTER key.
Perform steps
1
to
3
of the procedure in “Basic operation for changing the initial
setup”.
q
Front speaker (L)
L
C
Exit
3.9
ms
5.3
ms
-3
dB
+1
dB
+2
dB
+2
dB
Test
R
SW
SL
SR
Speaker Setting
Press RETURN to cancel
Delay time (Center speaker)
Center speaker
Front speaker (R)
Subwoofer
Surround speaker (R)
Delay time L/R
(Surround speakers)
Surround speaker (L)
Channel balance (Center speaker)
Channel balance (Surround L)
Channel balance (Surround R)
Channel balance
(Subwoofer)
