17
DVF-9010 (En/E)
Operations
Other
Preparations
(PCM/BIT STREAM)
COAXIAL
OPTICAL
DIGITAL OUTPUT
CENTER
S-VIDEO 1
VIDEO OUTPUT
MIX LINE
OUTPUT
S-VIDEO 2
FRONT SURROUND SUBWOOFER
6CH. OUTPUT
L
R
L
R
1
2
OPTICAL IN/Optical fiber cable (provided)
Monitor TV
(commercially available)
Center speaker
DVF-9010
To wall AC outlet
Stereo system (commercially available)
* The connected components shown here are typical examples.
Surround
speaker (L)
Front speaker (L)
Active subwoofer
Notes
Notes
COAXIAL IN/Digital cord (75
Ω
coaxial) (commercially available)
AV receiver with 6-channel input (commercially available)
VIDEO OUT/Video cord (75
Ω
coaxial) (commercially available)
S-VIDEO IN
S-VIDEO OUT/S-VIDEO cord (commercially available)
VIDEO IN
CENTER IN/Audio cord (provided)
SUBWOOFER IN/Audio cord (provided)
FRONT L/R IN/Audio cord (provided)
SURROUND L/R IN/Audio cord (provided)
S-VIDEO IN/S-VIDEO cord (provided)
VIDEO IN/Video cord (75
Ω
coaxial) (provided)
Connect the cords and cables according to the jacks available on the connected AV receiver.
*If you want to use the macro
function of a KENWOOD
AUDIO VIDEO SURROUND
RECEIVER (optional), connect
this player to a wall AC outlet.
Be sure to set the POWER
switch on the front panel of
this unit to OFF when you are
going to leave the unit
unattended for going out of
the house, etc.
System Connections
Make connection as shown below. When connecting the
related system components, refer also to the instruction
manuals of the related components.
Caution: Do not plug in the power lead until all connec-
tions are completed.
1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
The VIDEO OUTPUT jacks should be connected directly to the TV. Do
not connect them to the TV via a VCR. Otherwise the played video
may be disturbed due to the copy protection function.
Initial setup
Set initial setup [6. TV Aspect] according to the aspect ratio (4:3 or
16:9) of your TV.
u
Surround
speaker (R)
Front speaker (R)
