English
— 42 —
Troubleshooting Guide
The messages shown below display your systems
condition.
EJECT:
No disc magazine has been loaded in the changer.
The disc magazine is not completely loaded.
E01
No Disc:
No disc has been loaded in the disc magazine.
E02
➪
Load a disc into the disc magazine.
Error 04:
The CD is quite dirty. The CD is upside-down. The CD
is scratched a lot.
➪
Clean the CD and load it correctly.
Error 05:
The CD is upside-down.
E05
➪
Load the CD correctly.
Blank Disc:
Nothing has been recorded on the MD.
E10
No Track:
No tracks are recorded on the MD, although it has a
title.
E11
Error 12:
MD is designed for data.
Error 30:
The faceplate of the slave unit being connected to
this unit has been removed.
E30
➪
Replace it.
Error 77:
The unit is malfunctioning for some reason.
E77
➪
Press the reset button on the unit. If the "Error 77"
code does not disappear, consult your nearest
service center.
Mecha Error: Something is wrong with the disc magazine. Or the
unit is malfunctioning for some reason.
E99
➪
Check the disc magazine. And then press the reset
button on the unit. If the "Mecha Error" code does
not disappear, consult your nearest service center.
H-HOLD:
The protective circuit in the unit activates when the
temperature inside the automatic disc changer
exceeds 60°C (140°F), stopping all operation.
E0d
➪
Cool down the unit by opening the windows or
turning on the air conditioner. As the temperature
falls below 60°C (140°F), the disc will start playing
again.
No Name:
• Attempted to display DNPS during the CD play
having no disc names preset.
E51
• Attempted to display SNPS during the receiving
session of the station having no station name
preset.
E50
No Title:
Attempted to display the disc title or track title while
the MD having no MD title is being played.
No Text:
• Attempted to display the disc text or track text
while the CD having no CD text is being played.
• Attempted to display the ID3 tag or contents
description while the MP3/WMA having no ID3 tag
or contents description is being played.
LOAD (Blink): Discs are being exchanged in the Disc changer.
File Check:
The unit is reading the data on the disc.
Please Close: Attempted to operate the disabled button while the
disc is being ejected (faceplate being slid open).
DPX-MP7050̲U.S̲r1 2003.07.25 04:28 PM ページ42
