This function reproduces many different virtual sound fields.
1
Enter the DSP control mode
Press the [DSP] button.
"DSP CTRL" is displayed.
2
Selecting the sound field setting
Press the [DSP] button.
Each time the button is pressed the sound field setting switches
as shown below.
Setting
Display
Stadium
"Stadium"
Concert hall
"Concert Hall"
Club disco
"Club Disco"
Church
"Church"
Listening
"Listening"
Bypass
"Bypass"
When operation stops for 10 seconds, the Sound Field Setting
closes.
Sound Field Setting
Turning the DSP effects ON or OFF.
A DSP is a device which uses digital control to correct the audio
signal and produce sound effects that can compensate for the
small passenger compartment of a vehicle.
Turn DSP System ON
Press the [DSP] button.
"DSP CTRL" is displayed.
Turn DSP System OFF
Press the [DSP] button for at least 1 second.
"DSP Off" is displayed.
DSP (Digital Signal Processor) System
— 15 —
Recall the preset equalizer curve classified in groups.
1
Enter the Equalizer control mode
Press the [EQ] button.
"EQ CTRL" is displayed.
2
Select an equalizer curve
Press the [EQ] button.
Each time the button is pressed the preset equalizer curve
switches.
Setting
Display
Flat
"Flat"
Rock
"Rock"
Pops
"Pops"
Dance
"Dance"
Vocal
"Vocal"
When Equalizer Curve is adjusted, the selection starts from "User".
Ending of Equalizer control mode
Press the [EQ] button for at least 1 second.
When operation stops for 10 seconds, the Equalizer control
mode closes.
Preset Equalizer Curve Selection
DPX-MP7050̲U.S̲r1 2003.07.25 04:28 PM ページ15
