You can adjust the faceplate angle for easy viewing.
Slide the faceplate
Press the [ANG] button.
Each time the button is pressed the faceplate is slid by 1 step.
Return the faceplate to the original position
Press the [ANG] button for at least 1 second.
• Do not apply excessive force to the faceplate. It can cause
damage.
• During the process of sliding of the panel, FM/AM station and tape
sound are suppressed.
Faceplate Angle Adjustment
You can store into or recall from memory up to 3 equalizer
curves.
1
Create an equalizer curve to put in the memory
Refer to <Equalizer Curve Adjustment> (page 16).
2
Put the equalizer curve in the memory
Press the [1] — [3] button for at least 2 seconds.
The preset number display blinks 1 time.
Recalling the equalizer curve
1
Enter the Equalizer control mode
Press the [EQ] button.
"EQ CTRL" is displayed.
2
Call up the equalizer curve
Press the [1]
—
[3] button.
Equalizer Curve Preset Memory
You can create your own equalizer curves.
1
Enter the Equalizer control mode
Press the [EQ] button.
"EQ CTRL" is displayed.
2
Select the frequency
Press the [
4
] or [
¢
] button.
Item
Setting
Frequency
"60Hz"
—
"16kHz"
The number of steps
7 bands
3
Adjust the level
Press the [FM] or [AM] button.
Item
Setting
Level
"–12"
—
"+12" (dB)
The number of steps
13 steps
4
Ending the Equalizer control mode
Press the [EQ] button for at least 1 second.
When operation stops for 10 seconds, the Equalizer control
mode closes.
Equalizer Curve Adjustment
General features
— 16 —
English
DPX-MP7050̲U.S̲r1 2003.07.25 04:28 PM ページ16
