Kenwood DPX-M3300BT, Instruction Manual

Page: 27 / 140

ENGLISH
19
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
[MANUAL EQ] Adjusts your own sound settings for each source.
• The settings are stored to
[USER] in [PRESET EQ] .
• The settings made may affect the current settings of [EASY EQ] .
[62.5HZ] [LEVEL] [LEVEL –9] to [LEVEL +9] ( [LEVEL 0] ): Adjusts
the level to memorize for each source.
(Before making an adjustment, select the source
you want to adjust.)
[BASS EXTEND] [ON] : Turns on the extended bass. ; [OFF] : Cancels.
[100HZ] / [160HZ] /
[250HZ] / [400HZ] /
[630HZ] / [1KHZ] /
[1.6KHZ] / [2.5KHZ] /
[4KHZ] / [6.3KHZ] /
[10KHZ] / [16KHZ]
[LEVEL –9] to [LEVEL +9] ( [LEVEL 0] ): Adjusts the level to memorize
for each source.
(Before making an adjustment, select the source you want to adjust.)
[Q FACTOR] [1.35] / [1.50] / [2.00] : Adjusts the quality factor.
[PRESET EQ] [NATURAL] / [ROCK] / [POPS] / [EASY] / [TOP40] / [JAZZ] / [POWERFUL] /
[USER] : Selects a preset equalizer suitable to the music genre.
• When the display demonstration is activated ( [ON] is selected
initially, page 23), [ROCK] is automatically selected as the
[PRESET EQ] .
– If you set [DEMO MODE] to [OFF] (page 23), [NATURAL] is
selected as the default setting for [PRESET EQ] .
(Select [USER] to use the settings made in [EASY EQ] or
[MANUAL EQ] .)
[BASS BOOST] [LEVEL1] to [LEVEL5] : Selects your preferred bass boost level. ;
[OFF] : Cancels.
[LOUDNESS] [LEVEL1] / [LEVEL2] : Selects your preferred low or high frequencies
boost to produce a well-balanced sound at low volume. ;
[OFF] : Cancels.
[SUBWOOFER SET] [ON] : Turns on the subwoofer output. ; [OFF] : Cancels.
[FADER] (Not applicable if 3-way crossover is selected.) (Page 6)
[R15] to [F15] ( [0] ): Adjusts the front and rear speaker output balance.
[BALANCE] [L15] to [R15] ( [0] ): Adjusts the left and right speaker output balance.
[VOLUME OFFSET] [–15] to [+6] ( [0] ): Presets the initial volume level of each source by
comparing to the FM volume level.
(Before adjustment, select the source you want to adjust.)
[SOUND EFFECT]
[SOUND RECNSTR]
(Sound
reconstruction)
(Not applicable for RADIO source and AUX source.)
[ON] : Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost in
audio data compression. ;
[OFF] : Cancels.
[SPACE ENHANCE] (Not applicable for RADIO source.)
[SMALL] / [MEDIUM] / [LARGE] : Virtually enhances the sound space. ;
[OFF] : Cancels.
[SND REALIZER] [LEVEL1] / [LEVEL2] / [LEVEL3] : Virtually makes the sound more
realistic. ; [OFF] : Cancels.
[STAGE EQ] [LOW] / [MIDDLE] / [HIGH] : Virtually adjusts the sound position heard
from the speakers. ; [OFF] : Cancels.
[DRIVE EQ] [ON] : Boosts the frequency to reduce the noise heard from outside the
car or running noise of the tyres. ; [OFF] : Cancels.
[SPEAKER SIZE] Depending on the crossover type you have selected (see “Change the
crossover type” on page 6), 2-way crossover or 3-way crossover
setting items will be shown. (See “Crossover settings” on page 20.)
By default, 2-way crossover type is selected.
[X ‘ OVER]
[DTA SETTINGS]
For settings, see “Digital Time Alignment settings” on page 21.
[CAR SETTINGS]
• For 2-way crossover: [SUB-W LEVEL] / [SUBWOOFER SET] is selectable only if
[SWITCH PREOUT] is set to [SUBWOOFER] . (Page 5)
•
[SUB-W LEVEL]
is selectable only when
[SUBWOOFER SET]
is set to
[ON]
.
Audio Settings
DPX-M3300BT_E_B5A-3851-00_EN_1st Draft.indd 19 DPX-M3300BT_E_B5A-3851-00_EN_1st Draft.indd 19 9/10/2021 11:53:17 AM 9/10/2021 11:53:17 AM