Kenwood DPX-M3300BT, Instruction Manual

Page: 33 / 140

ENGLISH
25
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Installation/Connection
Installing the unit (in-dash mounting)
Do the required wiring.
(Page 26)
Dashboard of your car
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
Installing the unit (without mounting sleeve)
1
Remove the mounting sleeve and trim plate from the unit before
installing.
2
Align the holes in the unit (on both sides) with the vehicle mounting
bracket and secure the unit with screws (commercially available).
Use only the specified screws. Using wrong screws might damage the
unit.
Removing the unit
1
Fit the catch pin on the extraction keys into the holes on both sides of
the trim plate, then pull it out.
2
Insert the extraction keys deeply into the slots on each side, then
follow the arrows as shown on the illustration.
DPX-M3300BT_E_B5A-3851-00_EN_1st Draft.indd 25 DPX-M3300BT_E_B5A-3851-00_EN_1st Draft.indd 25 9/10/2021 11:53:18 AM 9/10/2021 11:53:18 AM