— 34 —
E
nglis
h
Troubleshoot ing Guide
SOLUTION
POSSIBLE CAUSE
PROBLEM
A CD ejects as soon as it is
loaded.
The CD is upside-dow n.
Load the CD w ith the labeled side up.
The memory is erased w hen
the ignition is turned off.
The battery w ire has not been connected to the proper
terminal.
Connect the w ire correctly, referring to the section on
"Connecting Wires to Terminals".
The CD is quite dirty.
Clean the CD, referring to the section on "Cleaning CDs"
(see p. 6).
The sound skips on a CD.
The CD is scratched or dirty.
Clean the CD, referring to the section on "Cleaning CDs"
(see p. 6).
A track w ill not play.
Random play has been selected.
Turn off random play.
Connect the w ire correctly, referring to the section on
"Connecting Wires to Terminals".
The ignition and battery w ire are incorrectly connected.
The DSP effects are
imperceptible.
You are using a tw o-speaker system.
Use a front/rear four-speaker system.
Connect the w ire correctly, referring to the section on
"Connecting Wires to Terminals".
The front and rear output are reversed.
Connect the w ire correctly, referring to the section on
"Connecting Wires to Terminals".
The
+
and
-
of speakers are reversed.
Reset the fader or balance settings.
The fader or balance settings are set all the w ay to one
side.
http://www.usersmanualguide.com/