— 31 —
Installation
■
Inst allat ion (f or TOY OTA , N ISSA N Car et c.)
When performing a check of the CD operation prior to installation,
place this unit in a hirizontal position and perform a loading/eject
of the CD.
2
CA U TION
Install onto the car bracket using the supplied screw s (M 5
×
6
mm). The holes of the car bracket to use w ill differ depending on
the car model.
When a ground w ire is
included in the w iring kit
(w hich is sold separately),
fasten the ground w ire
w ith the binding screw
located on the rear panel
of this unit.
Accessory
2
(M 4
×
6 mm)
Accessory
1
or Accessory
0
(M 5
×
6 mm)
Accessory
3
(Only for NISSAN car)
Inst allat ion (f or HON D A A CU RA Car)
Assembly
■
Bottom
panel
(The application
position of
Accessory
5
is at the
bottom panel)
Fit the projections on both sides of the
Accessories
6
and
7
into the slits on
the Accessory
4
.
Accessory
4
Accessory
0
(M 5
×
6 mm)
Accessory
7
(R)
Accessory
6
(L)
Accessory
0
(M 5
×
6 mm)
You can choose from three installation types to fit your car.
Perform "Assem bly" before installation.
http://www.usersmanualguide.com/
