Kenwood DMX8019DABS, Instruction Manual

Page: 83 / 96

Connection/Installation
83
English
Ñ
Connecting the system and
external components
4
3
2
1
5 6
7 8 9 10
13
14
15
11 12
1 HDMI input
Use HDMI cable KCA-HD100 (optional
accessory).
When you connect the cable to HDMI terminal,
remove the fixture. After connecting the cable,
put the fixture again.
HDMI connector
Fixture
2 DAB antenna CX-DAB1 (Optional accessory)
!
Use of a CX-DAB1(optional accessory) as a DAB
antenna is recommended.
When using a commercially available DAB
antenna, the diameter of the SMB connector
must be Φ6.5 mm or less.
Φ 6.5 mm (maximum)
3 AV Audio output (ø3.5 mini jack)
4 FM/AM antenna input
5 When connecting to an external amplifier,
connect its ground wire to the car’s chassis to
avoid damaging the unit.
Rear Audio Preout
(Left; White, Right; Red)
Front Audio Preout
(Left; White, Right; Red)
Subwoofer Preout
(Left; White, Right; Red)
6 External I/F
Maximum power supply current : 12 V
=
500 mA
7 TV tuner remote output
8 This jack accepts either AV-IN (CA-C3AV;
Optional Accessory) or Side (Left or Right) View
Camera Input.
For more information, see
To set up the
camera assignment settings (P.55)
.
9
Dashboard camera interface
Connect a Dashboard Camera DRV-N520
(optional accessory).
(P.85)
10
Accessory 7 : GPS Antenna
Use the supplied GPS antenna. Using the GPS
antenna other than the supplied one may
cause a drop in positioning accuracy.
11 Accessory
4
: Bluetooth Microphone
12 Connect to vehicle’s steering remote harness.
Contact your KENWOOD dealer for details.
13 Rear view camera input (Yellow)
14 Front view camera/Dashboard camera
input (Yellow). See
To set up the camera
assignment settings (P.55)
.
15 Visual Output (Yellow)