Connection/Installation
82
+
+
+
+
When connecting to an external amplifier,
connect its ground wire to the car’s chassis to
avoid damaging the unit.
White/Black
Gray/Black
Green/Black
Purple/Black
Speaker impedance: 4-8 Ω
Purple
Green
Gray
White
To mid range left
speaker
Subwoofer Preout
To mid range right
speaker
Mid Range Preout
To tweeter left speaker
Tweeter Preout
To tweeter right
speaker
Power amplifier
(optional
accessory)
RCA Cable
(Sold separately)
Input
Speaker
Preout
NOTE
• For speaker system setup, see
• For speaker setup and crossover setup, see
.
• For how to connect speaker wires to terminals
other than speaker terminals and Preout
terminals, see
and
Ñ
3-way speaker system setup
Ñ
Wiring harness (Accessory
1
)
connector function guide
Pin
Color and function
A-4
Yellow
Battery
A-5
Blue/White
[2]
Power Control
A-6
Orange/White Dimmer
A-7
Red
Ignition (ACC)
A-8
Black
Earth (Ground) Connection
B-1/B-2 Purple (+) / Purple/Black (–) Rear Right
B-3/B-4 Gray (+) / Gray/Black (–)
Front Right
B-5/B-6 White (+) / White/Black (–)
Front Left
B-7/B-8 Green (+) / Green/Black (–)
Rear Left
*Speaker Impedance: 4-8 Ω
[1] [2]: Blue/White wire is provided two wires, [1] and [2].
Blue/White wire total output ([1] + [2]):
12 V
=
350 mA
#
WARNING for Connecting the ISO
Connector
The pin arrangement for the ISO connectors depends
on the type of vehicle you drive. Make sure to make
the proper connections to prevent damage to the
unit. The default connection for the wiring harness is
described in (1) below. If the ISO connector pins are set
as described in (2), make the connection as illustrated.
Please be sure to reconnect the cable as shown (2)
below to install this unit to the Volkswagen vehicles etc.
(1): Default setting
The red (A-7 pin) of the vehicle’s ISO connector is linked
with the ignition, and the yellow (A-4 pin) is connected
to the constant power supply.
Red (Ignition cable)
Yellow (Battery cable)
Yellow (A-4 pin)
Red (A-7 pin)
Unit
Vehicle
(2)
The red (A-7 pin) of the vehicle’s ISO connector is
connected to the constant power supply, and the
yellow (A-4 pin) is linked to the ignition.
Red (Ignition cable)
Yellow (Battery cable)
Yellow (A-4 pin)
Red (A-7 pin)
Unit
Vehicle
Summary of Contents for DMX8019DABS
Page 96: ......
