78
CONNECTION/INSTALLATION
❏
Installation procedure
1
To prevent a short circuit, remove the key
from the ignition and disconnect the
·
battery.
2
Make the proper input and output wire
connections for each unit.
3
Connect the speaker wires of the wiring
harness.
4
Connect the wiring harness wires in the
following order: ground, battery, ignition.
5
Connect the wiring harness connector to
the unit.
6
Install the unit in your car.
•
Make sure that the unit is installed securely
in place. If the unit is unstable, it may
malfunction (e.g., the sound may skip).
7
Reconnect the
·
battery.
8
Configure <Initial SETUP>. (Page 4)
Installing the unit
❏
Installing the unit (Only for DDX9903S/
DDX9703S/DDX6903S/DDX6703S/
DDX9716BTS)
•
Bend the tabs of the mounting sleeve with a
screwdriver or similar utensil and attach it in place.
❏
Installing the unit using the mounting
bracket removed from the car
Car Bracket
4
or
5
4
or
5
•
Select the appropriate type of screw for the
mounting bracket: flat head (
4
) or round head
(
5
).
❏
Installing the trim plate (Only for
DDX9903S/DDX9703S/DDX6903S/
DDX6703S/DDX9716BTS)
Attach the trim plate (
2
).
2