52
ENGLISH
Settings
Settings
3
Rotate the image (
1
) if necessary, then
confirm the selection (
2
).
A confirmation message appears. Touch
[Enter]
to store the new image. (The existing image is
replaced with the new one.)
<Viewing Angle>
Select the viewing angle in relation to the monitor to
make the image on the screen easier to see.
•
0
(Initial)/
–1
/
–2
/
–3
User interface settings
Display the <User Interface> screen.
On the Home screen, touch as follows:
Then, on the
<SETUP>
screen, touch
[User Interface]
.
<Steering Remote Controller>
(Only for
DDX6018BT/DMX6018BT/DDX5018BT/
DDX718WBTL/DMX718WBTL
)
Assign functions to the keys on the remote controller
of the steering wheel.
• This function is available only when your car is
equipped with the electrical steering remote
controller.
• You can only register/change the functions while
you are parked.
• If your steering remote controller is not compatible,
learning may not be completed and an error
message may appear.
1
When the unit is ready for learning, press
and hold a steering remote controller
button for about 2 seconds to register/
change.
• Refer to the message displayed to confirm
whether the unit ready before proceeding.
2
Select a function to assign to the selected
button.
3
Repeat steps 1 and 2 to register other
functions to other buttons.
4
Touch [Learning completed] to finish
procedure.
A confirmation message appears. Touch
[Yes]
.
• The unit can register/change all of the buttons’
functions at the same time. To do this, press all
buttons in turn and after pressing all of them, touch
[Learning completed]
in step 2. However, new
functions cannot be learned after this operation.
• When changing the functions already learned, touch
the assigned function you want to change in step 2
and then touch to select the new function from the
function list.
• Confirm the contents of the settable functions in the
function list. You cannot edit the function list.
To initialize the setting:
Touch
[Learning
initialization]
in step 2.
• A confirmation message appears. Touch
[Yes]
.
–
To cancel the initialization, touch
[No]
.
EN̲DDX2018TC̲KR.indb 52
EN̲DDX2018TC̲KR.indb 52
2017/11/30 15:35
2017/11/30 15:35
