Installation and Connection
Installation and Connection
Wiring connection
10 A fuse
Connect the antenna cord to the antenna terminal
USB input terminal (1 m)
Purple with white stripe
White
]
/ White with black stripe
[
Green
]
/ Green with black stripe
[
Gray
]
/ Gray with black stripe
[
Purple
]
/ Purple with black stripe
[
Orange with white stripe
Brown
Light blue with yellow stripe
Blue with white stripe (12 V
350 mA)
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
Light green
To the car’s reverse lamp harness when using the optional rear view camera
To the car light control switch
Not used.
To rear speakers/tweeter speakers*4 (right)
To front speakers/mid range speakers*4 (right)
To rear speakers/tweeter speakers*4 (left)
To front speakers/mid range speakers*4 (left)
Car battery
Car fuse
To the car chassis
To the OE remote adapter (not supplied) which is compatible with your car
To the power control terminal when using the optional power amplifier (Or)
To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna
Extension wire (
ø
)
To the car’s parking brake detection switch harness
(For best safety, be sure to connect the parking sensor.)
Ignition key switch
*1 Only for DDX396/DDX376BT/DDX276BT/
DDX26BT.
*2 Only for DDX396/DDX376BT/DDX276BT.
*3 Only for DDX419BT.
*4 Only for DDX396/DDX419BT: For 3-way
speaker system connection, see also page
57.
REVERSE
PRK SW
*1
¥
REMOTE CONT
STEERING WHEEL
REMOTE INPUT
P.CONT
ANT.CONT
ILLUMI
MUTE
“
*3
*2
56
ENGLISH
04_DDX_2019ST_KNRN_Body02.indd 56
04_DDX_2019ST_KNRN_Body02.indd 56
20/8/2018 4:34:58 PM
20/8/2018 4:34:58 PM