Auto pairing
When
<Auto Pairing>
is set to
[ON]
(page 39),
iOS (such as iPhone) devices are automatically paired
when connected via USB.
Pairing a Bluetooth device using SSP
(for Bluetooth 2.1)
When the Bluetooth device is compatible with
Bluetooth 2.1, a pairing request is sent from the
available device.
1
Search for the unit (“DDX3eX”/“DDX3”/
“DDX2”/“DDX4”) from your Bluetooth
device.
2
Confirm the request both on the device
and the unit.
On the device:
On the unit:
To reject the request:
Touch
[Cancel]
.
Bluetooth®
Bluetooth®
Pairing a Bluetooth device using a PIN code
(for Bluetooth 2.0)
1
Display the <PIN Code Set> screen.
On the Home screen, touch as follows:
Then, on the
<Setup>
screen, touch as follows:
[System]
<Bluetooth Setup> : [Enter]
On the
<Bluetooth Setup>
screen, touch as
follows:
<PIN Code> : [0000]
2
Change the PIN code.
If you wish to skip changing the PIN code, go to
step 3.
0000
1
2
3
4
5
6
7
8
0
Enter
Clear
9
PIN Code Set
• To delete the last entry, touch
[Clear]
.
• To delete the PIN code, touch and hold
[Clear]
.
3
Search for the unit (“DDX3eX”/“DDX3”/
“DDX2”/“DDX4”) from your Bluetooth
device.
4
Select the unit (“DDX3eX”/“DDX3”/
“DDX2”/“DDX4”) on your Bluetooth
device.
• If a PIN code is required, enter “0000” (initial) or
new PIN code you have entered in step 2.
• When pairing is completed, the device is
registered on the
<Paired Device List>
screen.
Note
• The PIN code is initially set to “0000”.
• The maximum number of digits in the PIN code is 15.
Connecting/disconnecting a registered
Bluetooth device
1
Display the <Paired Device List> screen.
On the Home screen, touch as follows:
Then, on the
<Setup>
screen, touch as follows:
[System]
<Bluetooth Setup> : [Enter]
On the
<Bluetooth Setup>
screen, touch as
follows:
<Paired Device List> : [Enter]
34
ENGLISH
00_DDX_2019ST_KN_RN.indb 34
00_DDX_2019ST_KN_RN.indb 34
31/5/2018 2:44:27 PM
31/5/2018 2:44:27 PM
