Settings
Settings
[USB 1 Wire]
Select this when the device is
connected via the USB input
terminal (cable from the rear
panel).
[Bluetooth]
Select this when the device is
connected via Bluetooth. (Go to
step 3.)
If
[Android/Other]
is selected in step 1:
Bluetooth
Next
Smartphone Setup
The
<Paired Device List>
screen appears. Go to
step 3.
3
When selecting [Bluetooth] as the
connection method: Select the device (
1
),
then touch [OK] (
2
) to connect.
• If the device is already connected, skip step
1
.
Device Name 1
Device Name 5
Device Name 4
Device Name 3
Device Name 2
Remove
Connection
OK
Paired Device List
<Bluetooth Setup>
Configure settings for using a Bluetooth device, such
as connection and other general operations. For
details, see “Bluetooth settings” on page 27.
<Beep>
•
ON
(Initial): Activates the key-touch tone.
•
OFF
: Deactivates the key-touch tone.
<SETUP Memory>
Memorize, recall, or clear the settings you have made.
• The memorized settings are kept even when the unit
is reset.
• Available only when
<SETUP Memory>
is set to
[Unlock]
(selected initially).
Touch
[Yes]
to display the setting screen, then select
an operation:
•
Recall
: Recalls the memorized settings.
•
Memory
: Memorizes the current settings.
•
Clear
: Clears the currently memorized settings and
return to the factory (initial) settings.
•
Cancel
: Cancels.
A confirmation message appears. Touch
[Yes]
.
You can also set to lock the
<SETUP Memory>
from
being changed. Touch
[Lock]
to lock the settings.
• Some items in
<Setup>
menu, e.g.
<Speaker/
X’over>
, cannot be adjusted when
[Lock]
is
selected.
<DivX(R) VOD>
This unit has its own Registration Code. Once you
have played back a file with the Registration Code
recorded, this unit’s Registration Code is overwritten
for copyright protection.
• Touch
[Enter]
to display the information.
• To return to the previous screen, touch
[OK]
.
<Security Code>
Register the security code for the unit. (Page 5)
<Serial Number>
(Not applicable for Indonesian models
)
Displays the serial number.
<Touch Panel Adjust>
Adjust the touch positions of the buttons on the
screen.
Touch the center of the marks at the upper left (
1
),
the lower center (
2
), then the upper right (
3
) as
instructed.
Cancel Reset
Touch Panel Adjust
• To reset the touch position, touch
[Reset]
.
• To cancel the current operation, touch
[Cancel]
.
35
ENGLISH
04_DDX_2019ST_MN_Body02.indd 35
04_DDX_2019ST_MN_Body02.indd 35
28/6/2018 4:25:28 PM
28/6/2018 4:25:28 PM
