ENGLISH
73
❏
Discs
Recordable/Rewritable discs cannot be played
back.
• Insert a finalized disc.
• Finalize the discs with the component which you
used for recording.
Tracks on the Recordable/Rewritable discs
cannot be skipped.
• Insert a finalized disc.
• Finalize the discs with the component which you
used for recording.
Playback does not start.
• The format of files is not supported by the unit.
No picture appears on the external monitor.
• Connect the video cord correctly.
• Select the correct input on the external monitor.
DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC discs
cannot be played back.
• Record the tracks using a compatible application
on the appropriate discs. (Page 69)
• Add appropriate extension codes to the file
names.
Tracks on the Recordable/Rewritable discs are
not played back as you have intended them to
play.
• Playback order may differ from the one played
back using other players.
❏
USB
“Reading” does not disappear from the screen.
• Turn the power off and on again.
While playing a track, sound is sometimes
interrupted.
• The tracks are not properly copied into the USB
device. Copy the tracks again, and try again.
Tracks are not played back as you have intended
them to play.
• Playback order may differ from the one played
back using other players.
❏
Android
Sound cannot be heard during playback.
• Reconnect the Android device.
• When
<Android Setup>
is set to
[HAND MODE]
,
launch any media player application on the
Android device and start playback.
Sound output only from the Android device.
• When
<Android Setup>
is set to
[HAND MODE]
,
relaunch the current media player application or
use another media player application.
• Restart the Android device.
• If this does not solve the problem, the connected
Android device is unable to route the audio signal
to unit.
Cannot playback when <Android Setup> is set to
[BROWSE MODE].
• Make sure KENWOOD Music Play APP is installed
on the Android device.
• Reconnect the Android device and select the
appropriate control mode.
• If this does not solve the problem, the connected
Android device does not support the Browse
Mode.
“NO DEVICE” or “READING” keeps flashing.
• Switch off the developer options on the Android
device.
• Reconnect the Android device.
• If this does not solve the problem, the connected
Android device does not support the Browse
Mode.
❏
iPod/iPhone
No sound comes out of the speakers.
• Disconnect the iPod/iPhone, then connect it again.
• Select another source, then reselect
“iPod”
.
The iPod/iPhone does not turn on or does not
work.
• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
• Reset the iPod/iPhone.
Sound is distorted.
• Deactivate the equalizer either on this unit or the
iPod/iPhone.
A lot of noise is generated.
• Turn off (uncheck) “VoiceOver” on the iPod/
iPhone. For details, visit <http://www.apple.com>.
No operations are available when playing back a
track containing artwork.
• Operate the unit after the artwork has loaded.
Videos cannot be played.
• Connect with USB Audio and Video cable
KCA-iP202 (optional accessory) to iPod/iPhone
30-pin connector model. Other cables cannot be
used.
• Select
[USB + AV-IN]
for
<iPod Setup>
.
(Page 21)
REFERENCES
REFERENCES
Continued on the next page...
2017DDX-Entry̲E.indb 73
2017DDX-Entry̲E.indb 73
2016/10/31 14:33
2016/10/31 14:33
