ENGLISH
63
CONNECTION/INSTALLATION
CONNECTION/INSTALLATION
❏
Installation procedure
1
To prevent a short circuit, remove the key
from the ignition and disconnect the
·
battery.
2
Make the proper input and output wire
connections for each unit.
3
Connect the speaker wires of the wiring
harness.
4
Take Connector B on the wiring harness
and connect it to the speaker connector in
your vehicle.
5
Take Connector A on the wiring harness
and connect it to the external power
connector in your vehicle.
6
Connect the wiring harness connector to
the unit.
7
Install the unit in your car.
• Make sure that the unit is installed securely
in place. If the unit is unstable, it may
malfunction (eg, the sound may skip).
8
Reconnect
the
·
battery.
9
Press the reset button. (Page 3)
10
Configure
<Initial Setup>
. (Page 4)
Installing the unit
❏
Installing the unit
• Bend the tabs of the mounting sleeve with a
screwdriver or similar utensil and attach it in place.
❏
Installing the trim plate
Attach the trim plate (
2
).
2
2017DDX-Entry̲E.indb 63
2017DDX-Entry̲E.indb 63
2016/10/31 14:33
2016/10/31 14:33