CONNECTION/INSTALLATION
CONNECTION/INSTALLATION
Connection
R
Connecting
wires
to
termina
l
s
(for
DDX
6
015BT
/
DDX4015BT
/
DDX415BT
/
DDX415BTM
/
DDX315
/
DDX315M)
52
See page 54.*
1
10 A fuse
Ignition key switch
Fuse box
Battery
C
onnect to the vehicle’s reverse lamp harness when
using the optional rear view camera.
C
onnect to the vehicle’s parking
brake detection switch harness.
• For best safety, be sure to connect
the parking sensor.
D
epending on what antenna you are using, connect either to the control
terminal of the motor antenna, or to the power terminal for the booster amplifier
of the film-type antenna. (
M
ax. 300 mA, 12
V
)
W
hen using the optional power amplifier, connect to its power control terminal.
N
ot used.
To use the steering wheel remote control feature, an exclusive remote adapter
(not supplied) matching your car is required.
To car light control switch
To car chassis
Purple with white stripe (Reverse sensor wire)
Light green (Parking sensor wire)
1
White
ª
/ White with black stripe
·
:
To front speaker (left)
Gray
ª
/ Gray with black stripe
·
:
To front speaker (right)
Green
ª
/ Green with black stripe
·
:
To rear speaker (left)
Purple
ª
/ Purple with black stripe
·
:
To rear speaker (right)
Blue (Antenna control wire)
Blue with white stripe (Power control wire)
Brown (Mute control wire)
Light blue with yellow stripe (Steering remote control wire)
Orange with white stripe (Dimmer control wire)
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
See page 54.
*
2
See page 54.
C
onnect to the vehicle’s steering remote harness.
C
ontact your Kenwood dealer for details.
6
USB terminal (0.8 m): See page 54.
*
1
Only for DDX6015BT/DDX4015BT/DDX415BT/DDX415BTM.
*
2
If no connections are made, do not let the cable come out from the
tab.
3
C
onnect the antenna cord to
the antenna terminal.
DDX̲Entry̲M.indb 52
DDX̲Entry̲M.indb 52
2014/09/01 15:12
2014/09/01 15:12
