Kenwood C-V751 Instruction Manual Download Page 62

Page: 62 / 64

In case of difficulty

Remote control unit

Batteries are exhausted.

The remote control unit is too far away from the
main system, controlling angle is too large, or
there is an obstacle in between.

The audio cords and system control cords are
not connected properly.

The source component to be operated does not
contain the tape(s) or disc.

Batteries are exhausted.

The microcomputer is malfunctioning.

Replace with new batteries.

Operate the remote control unit within the
controllable range.

Connect properly referring to “System con-
nection”.

Place the tape(s) or disc in the source compo-
nent to be played.

Replace with new batteries.

Reset the GRC unit.

Remote control operation is not possible.

The GRC screen is not displayed.

Remote control operation is not available
though the GRC screen is displayed.

Remedy

Cause

Symptom

Summary of Contents for C-V751

































































Search results

Summary of Contents for C-V751

Reviews:

Related manuals for C-V751

Brands by name

Popular brands

Kenwood C-V751, Instruction Manual

Search results

Summary of Contents for C-V751

Reviews:

Related manuals for C-V751

Brands by name

Popular brands