Kenwood C-V751 Instruction Manual Download Page 49 | Manualshive

Page: 49 / 64

background image

49

Listening to radio broadcasts

TV

* Optional in this mode.

Dolby Pro Logic

Dolby Pro Logic is a specially encoded 2 channel surround format designed to provide theater-
like surround sound from Dolby Surround encoded sources (such as video and Laserdisc
software marked

). This AV CONTROL CENTER is equipped with a Dolby

Pro Logic surround decoder to let you enjoy the wide variety of currently available Dolby
Surround home video software.

Dolby 3 Stereo

Dolby 3 Stereo is available for systems that do not have surround speakers. When in the Dolby
3 Stereo mode the surround information is redirected to the front left and right speakers. This
mode is designed for use with Dolby Surround program sources, but can also improve sound
field unity for programs that are not Dolby Surround encoded. Dialog positioning and sound
image definition, however, may not be as accurate when used with programs that are not
Dolby Surround encoded.

Front Speaker

Subwoofer*

Center speaker

TV

DSP mode

The

DSP

mode lets you add the atmosphere of a live concert or hall to PCM or analog of

program source. These modes are particularly effective when used with stereo program
sources, like CD, television, and FM radio. You might enjoy trying the

ARENA

,

THEATER

,

JAZZ CLUB

mode the next time you watch a concert or sporting event!

Front Speaker

Subwoofer*

Surround speaker

* Optional in this mode.

Center speaker

Ambience effects

Recommended speaker installation

It is recommended that the surround speakers are installed straight to the left and right of the listening position or slightly behind, at a height
of about 1 meter higher than the listener’s ears.

TV

DVD 6-channel INPUT mode

Using a DVD player or the like equipped with six (5.1) output channels and the receiver, you
can enjoy multi-channel encoded DVD source material in all its splendor. Since the source
signals are digital and each channel is input independently, the resulting sound quality, sense
of spaciousness, and dynamic range are superb.

Front Speaker

Subwoofer

Surround speaker

Center speaker

* Optional in this mode.

TV

Front Speaker

Subwoofer*

Center speaker

Surround speaker

«
...
47
48
49
50
51
...
»

Summary of Contents for C-V751

































































Reviews:

No comments

Related manuals for C-V751

Brand: JEFF ROWLAND Pages: 13

Brand: Nakamichi Pages: 24

Sound Palette SP2400

Brand: Mackie Pages: 28

FTDX1200 Series

Brand: Yaesu Pages: 20

Brand: icon Audio Pages: 9

Brand: ifi Pages: 33

Brand: Toa Pages: 1

Brand: MTX Pages: 19

Brand: Pro-Ject Audio Systems Pages: 3

Subwoofer Gadget

Brand: Natural Bass Technology Pages: 2

Brand: Ace Plus Pages: 11

Brand: Galil Pages: 16

iPaul BPM 245.000

Brand: Rainbow Pages: 16

Brand: Soundigital Pages: 14

Brand: Pyle Pages: 10

Brand: Sencor Pages: 9

Brand: Tascam Pages: 8

THE PERCOLATOR COMBO

Brand: Zeppelin Design Labs Pages: 74

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands