29
EN
Preparations
Basic section
Application section
Knowledge section
Basic use method
Making your favorite sounds (MANUAL EQ )
This unit is equipped with 7-band equalizer. It
enables you to make your favorite frequency
response curve with frequencies from super
bass to super high range.
º
1
Press the MANUAL EQ key on the remote
control unit.
÷
Equalizer curve, level and frequency are
displayed and the
EQ
indicator blinks.
2
Select an equalizer band (frequency) by
pressing the MULTI CONTROL
@
/
#
key on
the remote.
÷
The display of selected band blinks.
÷
The frequency bands from 1 to 7 can be
selected.
3
Adjust the equalizer level by pressing the
MULTI CONTROL
%
/
fi
key on the remote.
÷
The level can be adjusted by one step (1dB) at
the range of -8(dB) to +8(dB).
÷
The manual EQ setting mode will be cancelled
when the
MANUAL EQ
key is pressed.
÷
Image of level adjustment
LEVEL(dB)
Variable
levels
Frequency
0
+8
-8
5
The TREBLE setting is displayed.
6
Press the MULTI CONTROL
@
/
#
key on the
remote to select a frequency type (Low: 5kHz,
Mid: 7kHz, High: 10kHz)
7
Adjust the level of TREBLE with the INPUT
SEL./MULTI CONTROL knob [press the
MULTI CONTROL key on the remote].
8
Press the SET key to confirm TREBLE.
÷
The level can be adjusted by one step (1dB) at the
range of -6(dB) to +6(dB).
÷
The
TONE
indicator lights up after the setting
when the level is other than "0".
÷
Image of variable frequencies (
TURN OVER
)
Frequency
LEVEL
Va ri a b l e
Fre q u e n c i e s
Va ri a b l e
F re q u e n c i e s
BASS
TREBLE
High
Mid
Low
÷
Image of the level adjustment
LEVEL(dB)
0
+6
-6
BASS
TREBLE
Variable
levels
Frequency
÷
Press the
SOUND SELECTOR
key to end the op-
eration or to cancel it.
The settings for TONE/TURN OVER and MANUAL EQ cannot be applied at the same time.
*5613/23-38/EN
06.1.6, 0:53 PM
29
