8
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow
the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
CLASS 2 LASER SAFETY STATEMENT
650+/- 10nm
This laser device complies with International Standard IEC/EN 60825-1: ED 2. 2007, Class 2 Laser
Product and also complies with 21 CFR 1040.10 and 1040.11, except for deviations pursuant to laser
Notice No. 50, dated June 24, 2007:
1. Emission of a parallel beam of visible light;
2. Maximum Power of 1 milliwatt CW, wavelength range 650±10 nanometers;
3. Operating temp between 0 ° C (32° F) to 40° C (104° F).
• Do not disassemble the device
• Do not use the device outside of its specified operating temperature range. If the device is
exposed to an environment outside of its prescribed operation, turn off the device and allow the
temperature to stabilize within the specified operating range before using the device.
CAUTION!
A set of warning labels in different languages is provided with this product. It is essential
that the correct country-specific warning label is applied to the laser pointer for the safety
of the user and of the people nearby.
CAUTION!
This device has no serviceable parts. Use of controls or adjustments or performance of
procedures other than those specified herein may result in hazardous radiation exposure.
FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
MODIFICATIONS:
Modifications not expressly approved by Kensington may void the user’s authority to operate the device
under FCC regulations and must not be made.
Operating Frequency Range: 2.402GHz to 2.478GHz
Maximum RF Output Power: 0.0 dbm
FCC DECLARATION OF CONFORMITY COMPLIANCE STATEMENT
This product complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept any interference received, including interference that may
cause undesired operation. As defined in Section 2.909 of the FCC Rules, the responsible party for this device is Kensington
Computer Product Group, 1500 Fashion Island Blvd, 3rd Floor, San Mateo, CA 94404,USA.
INDUSTRY CANADA CONFORMITY
This Class B digital apparatus complies with Canadian ICES-003.
This device has been tested and found to comply with the limits specified in RSS-210. Operation is subject to the following
two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
CE DECLARATION OF CONFORMITY
Kensington declares that this wireless product model is in compliance with the essential requirements and other relevant
provisions of R&TTE directive (1995/5/EC) and other applicable EC directives.
For Europe, a copy of the Declaration of Conformity for this product may be obtained by clicking on the Compliance
Documentation link at
www.support.kensington.com
THE FOLLOWING INFORMATION IS ONLY FOR EU-MEMBER STATES:
The use of the symbol indicates that this product may not be treated as household waste. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of this product. For more detailed information
about recycling of this product, please contact your local city office, your household waste disposal service or the shop
where you purchased the product.
Summary of Contents for presenter expert
Page 2: ...2 1 2...
