Kennmex SolidPOS 872, User Manual

Page: 64 / 68

64/68 Version 1.1
Chapter 5 – M/B Information
5.1 M/B Jumper Setting
(POS87-2EB-478, POS87-5EB-478)
Clear CMOS Setup
If you want to clear the CMOS Setup (for example forgot the password you
should clear the setup and then set the password again.), you should close the
JP1 about 3 seconds, then open again. Set back to normal operation mode.
JP1: Clear CMOS Setup
JP1 Description
1-2 Keep CMOS Setup
(Normal Operation)
2-3 Clear CMOS Setup
Compact Flash Card Master/Slave Mode Setting
JP2: Master/Slave Mode Setting
JP2 Description
OPEN SLAVE
SHORT MASTER
Keyboard Setting
JP3: Keyboard Setting
JP3 Description
Open Disabled
Short Enabled