12
Open
Door
90
Degrees
Loosen or Remove
Screw
Bottom of Door
Loosen/Remove Screw (where applicable)
3. Loosen or remove screw.
Installation (Continued)
NOTE
Adjustable hinge should only be used after
doors have been leveled with rollers.
NOTE
If after adjusting doors higher the door makes
a popping/clicking sound, remove screw and
replace with the longer one supplied in the
handle package (select models).
Flipper
Mullion
Screw
Flipper
Mullion
Hinge
Adjusting Flipper Mullion Screw
To adjust the flipper mullion:
1. Loosen the screw located on the flipper
mullion hinge.
4. Lift the door while adjusting the
washer. To raise the door, rotate washer
clockwise (when viewed from the
bottom). To lower door, rotate washer
counter-clockwise (when viewed from
the bottom).
5. Retighten the screw (where applicable),
ensuring it is between the spokes of the
Hinge
Washer
Raise
Door
Lower
Door
Raising/Lowering Door
Screw (where applicable)
Re-tighten Screw
Hinge
Washer Spokes
Screw
washer. Screw will not be tight, just insert
until it is flush with the hinge.
